05.12.2012 Views

Isadora Manual v1.3 - TroikaTronix

Isadora Manual v1.3 - TroikaTronix

Isadora Manual v1.3 - TroikaTronix

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

• phase: Normally, all waves start at the zero point of their cycle. You can<br />

change this by adjusting the phase of the wave. The diagram of the wave will<br />

slide as you change this value, so that you can see the wave’s new starting<br />

point.<br />

• reset: Starts generating the wave from its starting point, which is controlled<br />

by the phase input property. This input is also to restart the wave when its<br />

once property is turned on.<br />

• once: If this property is turned on then the wave will go through only one<br />

cycle each time it receives a trigger on the reset input.<br />

Output Properties<br />

• value: The current value of the wave.<br />

YUV to RGB (v1.1)<br />

Converts a video stream from YUV to RGB.<br />

This actor is used to explicitly convert a YUV video stream to RGB, usually to be<br />

fed to a video-processing actor that prefers RGB.<br />

If the incoming stream is already RGB, then it is passed directly to the output.<br />

See “YUV Video Processing” on page 140 for more information about using YUV<br />

mode in <strong>Isadora</strong>.<br />

Input Properties<br />

• video in: The YUV video stream to be converted to RGB.<br />

• video out: The input video stream after conversion to RGB format.<br />

<strong>Isadora</strong> <strong>Manual</strong><br />

426

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!