E M I S S I O N S M E S S T E C H N I K - Ribble Enviro Ltd
E M I S S I O N S M E S S T E C H N I K - Ribble Enviro Ltd
E M I S S I O N S M E S S T E C H N I K - Ribble Enviro Ltd
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
EiUK USER MANUAL RASI 700<br />
11.8 Power ON and zeroing<br />
Press the ON key. The analyzer will start zeroing without any further<br />
action from the user.<br />
The probe shall NOT be installed in the stack during zeroing!<br />
While the analyzer is zeroing you will see a blinking<br />
task bar indicating the progress of zeroing.<br />
symbol in the<br />
Once the zeroing cycle is finished the analyzer is ready for measurement.<br />
If any defective sensors will be detected during the zeroing cycle you<br />
will get an error message on the display.<br />
Repeating the zeroing<br />
The zeroing can be repeated at any time as long as the probe is not inside<br />
the stack. In the main menu you select “Zeroing”, and after the displayed<br />
message press the OK key.<br />
OK<br />
OK<br />
, Zeroing<br />
Start zeroing<br />
31