E M I S S I O N S M E S S T E C H N I K - Ribble Enviro Ltd

EiUK USER MANUAL RASI 700
14 EXTRAS / ADJUSTMENTS
The RASI 700 is delivered in a standard software configuration which
should cover most needs. However, there are many ways to tailor the settings
to your individual needs if required. The possibilities are highly
flexible and individual adaptable.
Use the variable possibilities to adapt your analyzer to your own needs
and customize the measurement menu, the measurement window, the printer
out put and many other features. Usually this is something you will do
once you receive the analyzer, once you have adapted your analyzer you
will most probably don’t make much changes in future, but you can when
ever you need and want to do so.
After you have made any changes in the configuration, you should switch
off the analyzer to save all the changes that have been made. Next time
that you start up the analyzer, all changes will have been made.
14.1 Service values
Should your analyzer display an error message after zeroing (for example:
„O2-Sensor not OK"), then you can use the Service value menu to get detailed
information about possible defects. In this menu you will see all
service values of the sensors and also other parameters.
In case of a defect contact the EIUK service department. The EIUK service
technician will ask you about these values or he will ask you to send
them by fax or email.
OK
, Jump between the lines
F1
Function test gas pump (on / off)
F2
Function test purge pump (on / off)
ESC
return
57