Half Size All-In-One 386SX CPU CARD User’ s Guide

AR-B1375/AR-B1376 Users Guide
5.2.1 VGA Driver
(1) WIN 3.1 Driver
For the WIN31 operation system, user must in the DOS mode decompress the compress file. And then as to the
steps:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
In the DOS mode execute the SETUP.EXE file.
A:\>SETUP
The screen shows the chip type, and press any key enter the main menu.
There is 9 items for choice to setup. Please choose the item, notice the
function key defined. Press [ENTER] selected the , when this line appears [*]
symbol that means this item is selected. Press [End] starts to install.
The screen will show the dialog box to demand user typing the WIN31’s path. The default is
C:\WINDOWS.
Follow the setup steps’ messages execute. As completed the setup procedure will generate the
message as follow.
Installation is done!
Change to your Windows directory and type SETUP to run the Windows Setup program. Choose
one of the new drivers marked by an *. Please refer to the User’s Guide to complete the installation.
Step 6:
Step 7:
Step 8:
Press [Esc] key to return the main menu, and re-press [Esc] return to the DOS mode.
User can enter the WIN31 so you can find the icon located in the {CONTROL PANEL}
group.
Adjust the , , , , and .
(2) WIN 95 Driver
For the WIN95 operating system, user must in the DOS mode decompress the compress file. And then as to the
steps:
Step 1:
Step 2:
Step 3:
Enter the WIN95 operation system, please choose the item of the icon in
the {CONTROL PANEL}. Please select the item, and type the factory source
files’ path.
A:\VGAW95
And then you can find the item, select it and click the
button.
Finally, user can find the icon adds the item. You can select this item, and
adjust the , , …and other functions. Please refer to
the messages during installation.
5-2