FVA/A1 STERILIZERS

Symbol/Description of plate Plate location
; CAUTION
It is absolutely indispensable to ensure the following:
1. Main switch
2. Manual valve for discharging chamber pressure
1. Inside the technical area panel
2. Rear of electrical panel
1. Chamber body
2. Steam generator
1. Electrical panel
FVA/A1 - OPERATION AND
MAINTENANCE MANUAL
the stability of the power supply voltage intended for the sterilizer must be within a tolerance equal to ± 10% of the
required nominal value (frequency ± 2%);
failure to comply with this recommendation may cause severe malfunctions during sterilization cycles and damage
to the machine;
while cleaning or washing the chamber or parts of the sterilizer, absolutely do not use alcohol, gasoline, solvents of
any kind or substances that have an acid reaction, which can damage the stainless steel surfaces and the elastomer
parts;
use water, optionally in a weak solution with neutral detergents, in the manner described in the maintenance
instructions given in this manual;
in any kind of process, and particularly during manual interventions, FEDEGARI guarantees the sterilization
processes of its machines only when the person in charge of the process has given clearance of correct execution of
all the phases of the cycle provided for the product, by placing an approval signature on the document printed by the
control system of the autoclave.
2.4. RISKS LINKED TO USE OF THE SOFTWARE
Use of the software provided by FEDEGARI together with its products is granted under license and occurs under the full responsibility
of the customer (see also the General Terms of Sale).
! WARNING!
FEDEGARI or its representatives cannot in any circumstance be deemed responsible for direct or indirect damage
arising from the use of the software, from any defects present in the software, or otherwise arising from the users’
license of the software.
2.5. OPERATOR QUALIFICATION
The operations described in this manual and related to the individual phases of the life cycle of the machine have been analyzed
carefully and exhaustively by FEDEGARI also in accordance with the characteristics of the operator.
Operator competence is a necessary and indispensable condition to allow correct use of the machine in compliance with all the safety
requirements of this manual.
ID no. 85693 Rev. 2 8 / 31 July 2005