3-phase TEFV induction motors ATEX GAS - Zones 1 & 2
3-phase TEFV induction motors ATEX GAS - Zones 1 & 2
3-phase TEFV induction motors ATEX GAS - Zones 1 & 2
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3-<strong>phase</strong> <strong>TEFV</strong> <strong>induction</strong> <strong>motors</strong><br />
<strong>ATEX</strong> <strong>GAS</strong> - <strong>Zones</strong> 1 & 2<br />
Construction<br />
Component Materials Remarks<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
C1 - Description of FLSD flameproof <strong>motors</strong>: Ex d II B<br />
Finned housing Cast iron - with integral feet or without feet<br />
• 4, 6 or 8 fixing holes for foot mounting<br />
• lifting rings for frame size ≥ 90<br />
- external earth terminal<br />
Stator Insulated low-carbon magnetic steel<br />
laminations<br />
Insulated electroplated copper<br />
Rotor Insulated low-carbon magnetic steel<br />
laminations<br />
Aluminium (A5L) or copper<br />
Shaft Steel - for frame size ≤ 132:<br />
• tapped shaft end<br />
• closed keyway<br />
- for frame size ≥ 160:<br />
• tapped shaft end<br />
• open keyway<br />
End shields Cast iron<br />
4<br />
7<br />
10<br />
5 1<br />
- low carbon content guarantees long-term lamination pack stability<br />
- semi-enclosed slots<br />
- class F insulation<br />
- squirrel cage with inclined cage bars<br />
- rotor cage pressure die-cast in aluminium (or alloy for special applications) or soldered<br />
in copper<br />
- shrink-fitted to shaft or keyed<br />
- rotor balanced dynamically, class A - 1/2 key<br />
Bearings and lubrication - bearings preloaded at NDE from 80 to 315 ST and preloaded at DE from 315 M<br />
upwards<br />
Labyrinth seal<br />
Lipseals<br />
Plastic or steel<br />
Synthetic rubber<br />
Fan Composite material up to frame size<br />
225 inclusive, metal for larger models<br />
- lipseal or labyrinth seal at drive end and seal at non drive end for frame sizes up to 225<br />
inclusive and 280<br />
- decompression grooves for frame sizes 250 - 315 and 355<br />
- 2 directions of rotation: straight blades<br />
Fan cover Pressed steel - fitted with a drip cover for operation in vertical position outdoors, shaft end facing down<br />
Terminal box Cast iron<br />
Steel for frame size 280<br />
- type "d" in standard version and type "e" as an option (section C2.1)<br />
- fitted with a flameproof cable gland<br />
(cable Ø must be specified at time of ordering)<br />
- can be turned: 4 positions<br />
- internal earth terminal<br />
- terminal plate<br />
3<br />
2<br />
6<br />
9<br />
8<br />
21