You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5. Loader<br />
• Parameter change in PG Group<br />
Changing P34, Code 34 of PG Group from 0 to 1<br />
FUNC<br />
FUNC<br />
SHFT<br />
FUNC<br />
X4<br />
SHFT<br />
X3<br />
FUNC<br />
PG group<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
-. The 1st code of PG Group is displayed.<br />
-. Press FUNC key.<br />
-. SET lamp lights up.<br />
-. Can move to Code 1.<br />
-. Chang it to 4 by using UP() key.<br />
-. The first digit is changed to 4<br />
-. Press SHFT key.<br />
-. 0 in 04 is active.<br />
-. Increase up to 3 by using UP() key.<br />
-. Can move to Code 34<br />
-. Press FUNC key.<br />
-. SET lamp is out.<br />
-. It means the current position is Code 34 of PG Group.<br />
-. Press FUNC key.<br />
-. SET lamp light up.<br />
-. Code 34 is set to 0.<br />
-. Increase it to 1 by using UP() key.<br />
-. Press FUNC key.<br />
-. Press FUNC key once more when 1 blinks.<br />
-. SET lamp is out.<br />
-. Function code change is complete.<br />
-. Press SHFT key.<br />
10 -. Moved to Code 1 of PG Group.<br />
5-8