CSS Catalogue 2018/2019 (English)

ProX 2
Non-contact proximity
switch in the stand-alone
version
ClickMan ProX2 is a non-contact proximity
switch in the stand-alone version.
The actual proximity sensor is integrated in a
flexible tube. This makes a perfect positioning of
the sensor on the patient very easy.
In order to trigger a switching function, it is
sufficient to reach the immediate proximity of
the sensor with the hand, a finger or another
part of the body. As a result, the force required
for an actuation is reduced to a minimum.
In addition, intelligent operating aids such as an
anti-tremor filter or a minimum contact time can
be activated by means of PC software.
The sensor is electronically monitored and is
equipped with an ejection alarm. As an
acknowledgment to an operation, an acoustic
and optical signal is set as standard for the
patient.
Due to the integrated lithium polymer battery,
the ClickMan ProX2 is very flexible and can
also be used for mobile applications.
A corresponding S-CON 2 adapter (see page ) or
AssistX Call (see page 16) must be used for
connection to a call system.
ClickMan ProX2 can also be safely used with
AssistX Mobil (see page 17).
ClickMan ProX2 together with an AssistX Call or
AssistX Mobil is compliant to DIN VDE 0834.
For example, suitable for following patient groups:
•Quadriplegics
•Amyotrophic lateral sclerosis (ALS)
•Multiple Sclerosis (MS)
•Patients with severe paralysis
#20284 ClickMan ProX2 stand complete
solution
#20430 ClickMan ProX2 hinged bracket
complete solution
The ProX2 stand can be placed universally next
to the nursing bed or wheelchair and can be
operated from there. The ProX2 hinged bracket
can be mounted universally and simply with its
special clamp on table edges, table legs or
frame tubes of bed or wheelchairs. The
positioning of the 3 joints is securely fixed by a
handle.
www.csslabs.de | 21