Assistive technologies for people with disabilities. Full catalogue.
RemoBox for Easywave RemoBox Infrared controllable radio switching system RemoBox Infrared controllable radio switching system The RemoBox is an infrared radio converter. With an infrared remote control the entire spectrum of ELDAT Easywave radio receivers can be used. The corresponding function of the RemoBox is taught once into the Easywave radio receiver. You can select between 2-button operation (on / off), 1- button operation (alternating on / off) or a timer function (7 minutes on) at the receiver. In case that you only need a maximum of four radio receivers, the RemoBox can be switched to the IRS compatibility mode. A contact socket located directly on the RemoBox with normally closed and normally open contacts can also be controlled directly by infrared (nurse call etc.). The RemoBox can use simple PC software to generate all infrared codes for teaching into the appropriate environment control unit. Thus you do not need any additional teach-in remote control. Technical data: #20140 RemoBox for Easywave (DE/CH/EU) #20148 RemoBox for Easywave (GB) #20149 Wall mount for RemoBox #20139 IR remote control for RemoBox For European market only All receivers can be combined with Easywave hand transmitters or other RemoBoxes. ELDAT Easywave radio receivers are safely used via an encrypted radio protocol, which means that third party activation is not possible. •Power supply: USB (mains adapter enclosed, by means of USB cable included and any USB Powerpack or PC) •16 Easywave channels with up to 4 functions can be used; i. e. up to 64 different radio receivers can be controlled by infrared. •PC software for configuration, to test the radio commands and to play back all infrared codes through the RemoBox •Potential-free switching contact: 3.5 mm stereo jack plug with normally closed and normally open contact (switching power max. 160 mA) •High radio range, expandable with repeater. •Magnetic housing base for fixing to metal strips / iron pipes or the optional wall mounting plate. •Dimensions of 50 x 50 x 25.7 mm 6 | www.csslabs.de
RemoBox for Easywave Bundle of switchable sockets Practical bundle consisting of one or two Easywave socket receivers and a RemoBox for Easywave. #20330 RemoBox Bundle of 1 (D/A/NL/S/N) #20332 RemoBox Bundle of 1 (F/B/PL) #20334 RemoBox Bundle of 1 (CH) #20336 RemoBox Bundle of 1 (GB) #20331 RemoBox Bundle of 2 (D/A/NL/S/N) #20333 RemoBox Bundle of 2 (F/B/PL) #20335 RemoBox Bundle of 2 (CH) #20337 RemoBox Bundle of 2 (GB) Duo-Switch for Easywave 2-way radio transmitter for ELDAT Easywave This handy radio transmitter can be used together with the radio receivers from the extensive ELDAT Easywave product range. The Duo-Switch has two jack plugs, which can be used with single push-buttons, switches or sensors to perform up to two radio commands. It is possible to operate either up to two different radio commands in the push-button mode or a radio command in the switch mode (switch on when pressing the push-button and switch off when releasing). Technical data: Power supply: 2 Mignon AA batteries •Input 2x 3.5 mm jack plug for normally open single push-buttons/sensors •Push-button and switch mode •Range: free field: approx. 150 m Building: approx. 30 m •Dimensions approx.. 76 x 53 x 30 mm #20156 Duo-Switch for ELDAT Easywave Delivery without PikoButton Power Switch Adapter Set Set consisting of Duo-Switch and radio-controlled switchable socket Power switch adapter set to switch on and off 230 V devices with one sensor. The power switch adapter set consists of a handy radio transmitter and an Easywave radio-controlled socket. The radio transmitter has two jack plugs, which can be used to switch the radio-controlled switchable socket on and off with a single push-button or sensor. The selection of the slot allows you to specify whether switching is effected only as long as the sensor is actuated, or whether it is switched on during the first actuation and switched off during the second actuation. Technical data: •Power supply: 2 Mignon AA batteries •Input 2x 3.5 mm jack plug for normally open single push-buttons / sensors •Push-button and switch mode •Range: Freefield: approx. 150 m Building: approx. 30 m •Dimensions: Duo-Switch: approx. 76 x 53 x 30 mm Radio-controlled switch sockets are available in various country specific versions: #20077 Power Switch Adapter Set (D / A / NL / S / N) #20159 Power Switch Adapter Set (GB) #20160 Power Switch Adapter Set (F / B / PL) #20161 Power Switch Adapter Set (CH) Delivery without PikoButton For European market only www.csslabs.de | 7