REGO-FIX Main Catalogue ENGLISH

D
ISO 20 interface
ISO 20 toolholders
ISO 20
HAAS
Applications The REGO-FIX ISO 20 toolholders are designed to
work with the HAAS Office Mill. To utilize the full potential of
your machine, use the REGO-FIX brand of holders and collets
to see the difference quality can achieve in your machining
operations.
Balancing
//
100 % balanced to 50,000 rpm.
Matched tooling system for best fit For highest precision
and best results the whole system counts. Therefore
REGO-FIX components are carefully matched for optimum
fit and accuracy. This guarantees the best runout and balance.
For the influence of runout on tool life see the graph on page 270.
Accessories are not included in delivery.
Expert advice
We recommend tightening the clamping nuts with our
torque wrench.
For tightening torque recommendations, please refer to page 293.
ISO / ERM HAAS
L
Dimensions [mm]
Accessory
Type Part no. D L Wrench
ISO 20
ISO 20 / ERM 11 x 048 HAAS 2420.11116 16 48 E 11 M
ISO 20 / ERM 16 x 053 HAAS 2420.11616 22 53 E 16 M
ISO 20 / ERM 20 x 055 HAAS 2420.12016 28 55 E 20 M
Included in delivery: ISO toolholder comes with Hi-Q ® / ERM mini clamping nut and integral pull stud
114 ER