REGO-FIX Main Catalogue ENGLISH

Maintenance instructions for
floating chucks
MPH
There are two main versions of floating chucks
MPHC
MPH
With 2 screws on the side of
the flange.
With one screw in the
cylindrical shaft on the back
of the floating chuck.
1
Take both screws out with
a fitting screwdriver (PH0).
Blow out with dry pressurised
air.
1
Take the screw in the
cylinder out with a fitting
screwdriver (flat-head1).
Blow out with dry pressurised
air. Fill with 10 drops
of thin oil.
2
Put one screw back. Fill with
10 drops of thin oil.
2
Put the screw back in the
back (do not forget the
spring). Re-adjust the spring
tension in the cylinder shaft.
3
Put the second screw back.
124 ER