REGO-FIX Main Catalogue ENGLISH

More documents

Info

ER tapping holders ER thread-cutting solutions CYL SSY / HSK-A SSY Softsynchro ® tapping holder // With minimum length compensation // Eliminates small synchronization errors of machines (Rigid Tapping) CYL GSF tapping holder // With length compensation // For machines without a tapping option Applications // Machines for direct thread cutting // For all tapping tools with h9 shanks // The turning movement of the spindles can be offset with the feed axis and thus synchronized // Synchronization errors are created by the dynamics of the spindle and linear drives. The tapping holder is equipped with the minimum length compensation and compensates the synchronization errors // Guides coolant with up to 50 bar of pressure to the tap, without compromising length compensation // Depending on the application, the service life for the customer can be increased by up to 150 % Applications // Used on machines in which the feed movement is not synchronized with the thread pitch during processing // Ensures the compensation of differences between the thread pitch and spindle feed // Features a pressure-point mechanism // Safe tap cutting // Uniform, reproducible thread depths // Guides coolant with up to 50 bar of pressure to the tap, without compromising length compensation // Universal use thanks to its compact design and low gauge length Comparative axial force testing Occurring axial forces with thread forms M10 in St37. Speed 500 rpm Source: In-house testing Comparative axial force testing Occurring axial forces with thread forms M10 in St37. Speed 2.000 rpm Source: In-house testing 3000 3000 2500 2500 Axial force [N] 2000 1500 1000 500 Axial force [N] 2000 1500 1000 500 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Time [s] Summary The axial forces increase with increasing speed. With a rigid toolholder, the forces occurring when forming threads are considerably higher than with the Softsynchro ® tapping holder. This allows for the optimum use of the synchronous spindle with the best possible service life and thread surface quality. 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Time [s] <strong>REGO</strong>-<strong>FIX</strong> Softsynchro ® tapping holders Competitor synchronous toolholder Rigid synchronous toolholder 116 ER
ER tapping holders HSK-A SSY CYL SSY CYL GSF 69893-A DIN 1835 B+E DIN 1835 B+E ISO 12164 Dimensions [mm] Compression Tension Accessory Type Part no. D L [mm] [mm] SW Wrench HSK-A 63 SSY HSK-A 63 SSY / ERC 20 2563.62000 34 95.5 0.5 0.5 19 E 20 P HSK-A 63 SSY / ERC 32 2563.63200 50 108.8 0.5 0.5 32 E 32 Included in delivery: Tapping holder comes with Hi-Q ® / ERC clamping nut ER Dimensions [mm] Compression Tension Accessory Type Part no. D D1 L L1 [mm] [mm] SW Wrench CYL 25 SSY CYL 25 SSY / ERC 20 2625.62000 34 25 73 57 0.5 0.5 19 E 20 P CYL 25 SSY / ERC 32 2625.63200 50 25 87.5 57 0.5 0.5 32 E 32 Included in delivery: Tapping holder comes with Hi-Q ® / ERC clamping nut Dimensions [mm] Compression Tension Accessory Type Part no. D D1 L L1 [mm] [mm] SW Wrench CYL 25 GSF CYL 25 GSF / ERMC 20 2625.62001 28 25 85 57 5 7.5 28 E 20 M CYL 25 GSF / ERC 32 2625.63201 50 25 115 57 7 10 34 E 32 Included in delivery: Tapping holder comes with Hi-Q ® / ERC or Hi-Q ® / ERMC clamping nut L D1 D D1 D SW SW D SW HSK-A SSY / CYL SSY / CYL GSF HSK-A 63 SSY / ERC L1 L L1 L CYL 25 SSY / ERC CYL 25 GSF ER 117
Page 4 and 5:
High-performance toolholding from t
Page 6 and 7:
Your application is our motivation
Page 9 and 10:
PG-MB PG PG-CF PG-L PG-S PG-T PG-SG
Page 11 and 12:
Automatic clamping unit PGU Toolhol
Page 13 and 14:
Manual clamping unit PGC 2506 Clamp
Page 15 and 16:
powRgrip ® toolholders in Swiss qu
Page 17 and 18:
HSK-A toolholders HSK-A DIN 69893 I
Page 19 and 20:
HSK-A toolholders Dimensions [mm] H
Page 21 and 22:
HSK-F toolholders HSK-F DIN 69893 I
Page 23 and 24:
SK toolholders SK DIN 69871 DIN ISO
Page 25 and 26:
SK toolholders SK-B toolholders SK
Page 27 and 28:
SK+ toolholder SK+ DIN 69871 DIN IS
Page 29 and 30:
BT toolholders BT MAS 403 JIS B 633
Page 31 and 32:
Page 33 and 34:
powRgrip ®
Page 35 and 36:
REGO-FIX BT+ dual contact toolholde
Page 37 and 38:
CAT toolholders CAT CAT-B ASME B5.5
Page 39 and 40:
CAT+ toolholders REGO-FIX CAT+ dual
Page 41 and 42:
REGO-FIX CAPTO toolholders licensed
Page 43 and 44:
D ISO 20 interface ISO 20 toolholde
Page 45 and 46:
CYL toolholders CYL-T toolholders (
Page 47 and 48:
secuRgrip ® toolholders PG-SG PG-S
Page 49 and 50:
Heavy Duty secuRgrip ® Toolholders
Page 51 and 52:
D PG tapping holders HSK-A SSY CYL
Page 53 and 54:
powRgrip ® collets in Swiss qualit
Page 55 and 56:
PG standard collets PG Std. powRgri
Page 57 and 58:
PG standard collets PG Std. powRgri
Page 59 and 60:
Coolant flush collets PG-CF PG-CF p
Page 61 and 62:
Long shank collets PG-L PG-L powRgr
Page 63 and 64:
Short shank collets PG-S PG-S powRg
Page 65 and 66:
secuRgrip ® collets PG-SG PG-SG po
Page 67:
powRgrip ®
Page 70 and 71: Standard Colletholders for tapping
Page 72 and 73: Cylindrical colletholders CYL/ ER C
Page 74 and 75: HSK interface HSK toolholders Desig
Page 76 and 77: HSK-A toolholders HSK-A DIN 69893 I
Page 78 and 79: HSK-E toolholders HSK-F toolholders
Page 80 and 81: SK interface Steep taper toolholder
Page 82 and 83: SK-B toolholders SK-B DIN 69871 DIN
Page 84 and 85: BT interface Steep taper toolholder
Page 86 and 87: BT toolholders ERA Zero-Z ® toolho
Page 88 and 89: BT-B toolholders BT-B Dimensions [m
Page 90 and 91: BT+ interface REGO-FIX BT+ toolhold
Page 92 and 93: CAT interface Steep taper toolholde
Page 94 and 95: CAT-B toolholders CAT-B Dimensions
Page 96 and 97: CAT+ interface REGO-FIX CAT+ toolho
Page 98 and 99: REGO-FIX CAPTO interface REGO-FIX C
Page 100 and 101: REGO-FIX CAPTO toolholders licensed
Page 102 and 103: Cylindrical (CYL) interface Cylindr
Page 104 and 105: CYL / ER toolholder CYL Dimensions
Page 106 and 107: CYL / ERM toolholders (mini clampin
Page 108 and 109: CYLF / ERM toolholders (mini clampi
Page 110 and 111: CYLF / ERM toolholders (mini clampi
Page 112 and 113: CYDF / ERM toolholders (mini clampi
Page 114 and 115: MK interface Morse taper toolholder
Page 116 and 117: SH interface Automotive shank toolh
Page 118 and 119: D ISO 20 interface ISO 20 toolholde
Page 122 and 123: ER floating chucks ER floating chuc
Page 124 and 125: PHC floating chucks for coolant thr
Page 126 and 127: MPH mini floating chucks with intRl
Page 128 and 129: Maintenance instructions for floati
Page 130 and 131: Collet reductions Collet reductions
Page 132 and 133: Collet reductions with intRlox ® (
Page 134 and 135: swissQuick powRgrip ® adapter What
Page 136 and 137: Micromachining Standard and ultrapr
Page 138 and 139: Microbore collets ER-MB ER-MB Clamp
Page 140 and 141: ER standard collets and ultraprecis
Page 148 and 149: Metallic sealed collets ER-DM ER-DM
Page 154 and 155: ER-GB ER tapping collets ER-GB Manu
Page 156 and 157: ER tapping collets ER-GB ER-GB [inc
Page 158 and 159: PCM ET1 ER tapping collets PCM ET1
Page 160 and 161: ER tapping collets PCM ET1 PCM ET1
Page 162 and 163: Standard Standard with bearing Mini
Page 164 and 165: C Hi-Q ® ER / ER standard Hi-Q ®
Page 166 and 167: C Hi-Q ® ER / ERC Hi-Q ® / ERC fo
Page 168 and 169: Hi-Q ® ERB / ERBC Hi-Q ® / ERB fr
Page 170 and 171:
C Hi-Q ® ERM / ERMC Hi-Q ® / ERM
Page 172 and 173:
C Hi-Q ® ERMX / ERMXC intRlox ® H
Page 174 and 175:
C ER MS ER MS clamping nuts for hig
Page 176 and 177:
Hi-Q ® ERAX / ERAXC Hi-Q ® / ERAX
Page 178 and 179:
eCool ® RCS Fast and easy retrofit
Page 180 and 181:
eCool ® RCR Low-cost retrofitting
Page 182 and 183:
eCool ® accessories Matching acces
Page 184 and 185:
Use conditions RCR reCool ® reCool
Page 187 and 188:
MR product offering Experience high
Page 189 and 190:
Toolholders in Swiss quality Norm D
Page 191 and 192:
D HSK-A toolholders HSK-A DIN 69893
Page 193 and 194:
micRun ®
Page 195 and 196:
SK toolholders SK DIN 69871 DIN ISO
Page 197 and 198:
Page 199 and 200:
CAT toolholders CAT ASME B5.50 Dime
Page 201 and 202:
CYL toolholders CYL Dimensions [mm]
Page 203 and 204:
Swiss quality MR collets MR collets
Page 205 and 206:
MR collets MR collets Ø Type Part
Page 207 and 208:
Grooveless MR nuts for high-end mac
Page 209 and 210:
Multi Line product offering Experie
Page 211 and 212:
Toolholders and adapters WD MA KFD
Page 213 and 214:
Weldon end mill holders HSK-A / WD
Page 215 and 216:
Universal shell / face mill holders
Page 217 and 218:
Drill chucks HSK-A / KBF HSK-A/KBF
Page 219 and 220:
Multi Line
Page 221 and 222:
Weldon end mill holders SK / WD SK
Page 223 and 224:
Drill chucks SK / KBF SK / KBF DIN
Page 225 and 226:
d BT / WD Weldon end mill holders B
Page 227 and 228:
Universal shell / face mill holders
Page 229 and 230:
Morse taper holders BT / MK BT / MK
Page 231 and 232:
d D d D REGO-FIX CAPTO holders lice
Page 233 and 234:
D REGO-FIX CAPTO holders licensed b
Page 235 and 236:
Multi Line
Page 237 and 238:
Reduction sleeves for hydro chucks
Page 239 and 240:
Reduction sleeves HS [inch] HS Ø b
Page 241 and 242:
1.1.3 1.1.2 Accessories 1.1.1 powRg
Page 244 and 245:
powRgrip ® length-presetting tool
Page 246 and 247:
Sealing disks DS Effective solution
Page 248 and 249:
Sealing disks for ER / MR DS / ER D
Page 250 and 251:
Sealing disks for ER / MR DS / ER D
Page 252:
Sealing disks for ER DS / ER Tool d
Page 255 and 256:
Coolant flush disks for ER / MR KS
Page 257 and 258:
Coolant flush disks for ER / MR KS
Page 259 and 260:
Wrenches E MS E AX E A Suited wrenc
Page 261 and 262:
Wrench heads A-E A-E P A-E M A-E MX
Page 263 and 264:
Slip-off proof extension V-E AX for
Page 265 and 266:
Mobile workbench for PGU 9500 Descr
Page 267 and 268:
TORCO-BLOCK and components Type Par
Page 269 and 270:
Coolant tubes KSR Wrenches for cool
Page 271 and 272:
Technical information Discover powR
Page 273 and 274:
Increased cutter tool life with the
Page 275 and 276:
Successful clamping since 1972 Comb
Page 278 and 279:
XL vibration damping Optimize your
Page 280 and 281:
Form-fit for 100 % pullout protecti
Page 282 and 283:
Mastering both wet and dry applicat
Page 284 and 285:
Cryogen: Coolant at the right spot
Page 286:
powRgrip ® System and secuRgrip ®
Page 289 and 290:
Presetting range of powRgrip ® col
Page 293 and 294:
The unbeatable advantages from the
Page 295 and 296:
Instructions for correct clamping o
Page 297 and 298:
Recommended tightening torque for E
Page 299 and 300:
8° ER collets dimensions Size [mm]
Page 302 and 303:
Dimensions for ER collet cavities i
Page 304 and 305:
Technical information for tapping c
Page 306 and 307:
Reduction sleeves HS Measurements [
Page 308 and 309:
Spindle interface norms HSK SK BT C
Page 310:
HSK interface HSK DIN 69893 ISO 121
Page 313 and 314:
weight removed axis of gravity axis
Page 315 and 316:
Balancing quality In recent years t
Page 317 and 318:
Balancing at REGO-FIX All toolholde
Page 319 and 320:
Interpreting the DIN 69888:2008-09
Page 321 and 322:
designed specifically for this purp
Page 323 and 324:
Troubleshooting when drilling Possi
Page 325 and 326:
Troubleshooting when tapping Possib
Page 327 and 328:
Cutting speed conversion table for
Page 329 and 330:
Conversion table / inch-metric 0“
Page 331 and 332:
Position tolerances according to DI
Page 334 and 335:
Tolerance charts Outside dimensions
Page 336 and 337:
Core hole diameters for thread cutt
Page 338 and 339:
Core hole diameters for thread cutt
Page 340 and 341:
Shank diameter of taps Thread ISO 5
Page 342 and 343:
Material No. DIN AFNOR BS GOST USA
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Terminology M - Z M MA Shell Mill A
Page 360:
www.rego-fix.com 0362.00251 / ENG.1
show all

REGO-FIX Main Catalogue ENGLISH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?