REGO-FIX Main Catalogue ENGLISH

Increased cutter tool life with the powRgrip ® System
Influence of tool runout on tool life / Source: In-house testing
3
Surface finish [Ra]
2.5
2
1.5
1
0.5
Ra 1.6
All tool shanks are clampable
All kind of materials such as carbide or HSS as
of cylindrical, WELDON or Whistle Notch can
be clamped with powRgrip ® .
16 32 48 64 80 96 112 128 144 160 176
Cutting length [m] /
tool life
powRgrip ®
REGO-FIX ER System with Hi-Q ® clamping nut
Shrink-fit
Hydro chuck
Extensive collet range
Tools with shank diameters from 0.2 to 25.4 mm
(1“) can be clamped for milling, reaming, drilling
and as well for turning applications.
The possibilities of MQL, peripheral or internal
cooling are given.
Transferable torque of the powRgrip ® System
Measured transferable torque per shank diameter / Source: In-house testing
Transferable torque [Nm]
1200
1000
800
600
400
200
REGO-FIX powRgrip ® PG 32
5 10 15 20 25
Tool shank diameter [mm]
powRgrip ® PG 32
Shrink-fit
Wide range of toolholders
powRgrip ® -toolholders are available for many
spindle interfaces e.g. REGO-FIX CAPTO, BT, BT+,
SK, SK+, HSK, CAT, CAT+ or cylindrical spindle
interfaces. Discover our wide product range at
www.rego-fix.com.
Hydro chuck
REGO-FIX ER 40
Measurement of vibrations | powRgrip ®
Amplitude indication of the REGO-FIX powRgrip ® toolholder
Measurement of vibrations | Shrink-fit holder
Amplitude indication of a standard shrink-fit holder
Amplitude [µm]
120
80
40
0
-40
-80
-120
-160
0 0.002 0.004 0.06 0.08 0.1 0.12 0.14 0.16 0.18
Amplitude [µm]
120
80
40
0
-40
-80
-120
-160
0 0.002 0.004 0.06 0.08 0.1 0.12 0.14 0.16 0.18
Time [s]
Time [s]
Test and comparison done by:
Institute for production and high-performance laser technology
Technical University Vienna
Institut für Fertigungstechnik und Hochleistungslasertechnik
Technische Universität Wien
Expert advice
Test powRgrip ® free of charge! Get more information at
try.rego-fix.ch/toollife.
Technical information
269