REGO-FIX Main Catalogue ENGLISH

Supplying the right amount of coolant
to where it matters
Key features of external flood cooling
//
Universal application possibilities
//
Problems may arise with deep cavities
//
Reduction of tool life because cooling is not right
on the cutting edge
//
Suboptimal chip deflection
//
Limited adjustment of nozzles due to different tool
lengths and diameters
External flood cooling
Key features of peripheral cooling
//
Coolant is fed along the side of the tool to the cutting edge
//
Can be used for moderate cavities
//
Achieve peripheral cooling with reCool ® and the use
of our coolant flush disk KS / ER or PG-CF collet
Peripheral cooling
Key features of internal cooling
Internal cooling
//
Precise cooling at the cutting edge and improved
chip removal
//
Particularly suitable for deep cavities
//
Deep hole drilling and threading
//
Lubrication of cutting edge and cooling
//
Best surface quality
//
Achieve internal cooling with reCool ® and the use
of our sealing disk DS / ER
Technical information
279