REGO-FIX Main Catalogue ENGLISH

More documents

Info

Spindle interface norms HSK SK BT CAPTO DIN 69893 DIN 69871 MAS 403 ISO 26623 L2 L1 Measurements [mm] Type D1 D2 L1 L2 L3 G HSK DIN 69893 HSK-A 25 25 19 10 13 2.5 – HSK-C 25 25 19 8 13 2.5 – HSK-E 25 25 19 10 13 2.5 – HSK-A 32 32 24 20 16 3.2 – HSK-C 32 32 24 10 16 3.2 – HSK-E 32 32 24 20 16 3.2 – HSK-A 40 40 30 20 20 4 – HSK-C 40 40 30 10 20 4 – HSK-E 40 40 30 20 20 4 – HSK-A 50 50 38 26 25 5 – HSK-C 50 50 38 12.5 25 5 – HSK-E 50 50 38 26 25 5 – HSK-F 50 50 30 26 20 4 – HSK-A 63 63 48 26 32 6.3 – HSK-C 63 63 48 12.5 32 6.3 – HSK-E 63 63 48 26 32 6.3 – HSK-F 63 63 38 26 25 5 – HSK-A 80 80 60 26 40 8 – HSK-C 80 80 60 16 40 8 – HSK-F 80 80 48 26 32 6.3 – HSK-A 100 100 75 29 50 10 – HSK-C 100 100 75 16 50 10 – HSK-E 100 100 70 29 50 10 – SK DIN 69871 SK 30 31.75 50 3.2 47.8 15.85 M 12 SK 40 44.45 63.55 3.2 68.4 15.85 M 16 SK 50 69.85 97.5 3.2 101.75 15.85 M 24 BT MAS 403 BT 30 31.75 46 2 48.4 20 M 12 BT 40 44.45 63 2 65.4 25 M 16 BT 50 69.85 100 3 101.8 35 M 24 Polygon shank CAPTO ISO 26623 Polygon shank C3 32 – 15 19 – M 12 x 1.5 Polygon shank C4 40 – 20 24 – M 14 x 1.5 Polygon shank C5 50 – 20 30 – M 16 x 1.5 Polygon shank C6 63 – 22 38 – M 20 x 2 Polygon shank C8 80 – 30 48 – M 20 x 2 L3 HSK-E / HSK-F L3 D1 G D2 SK L2 L1 Norm TC50__S13_11_Skizze1 Schraffurfaktor 1 L3 Skizzenfaktor 0.35 Schriftfaktor 0.7 D1 G D2 Norm HSK-A80__S13_12_Skizze1 Schraffurfaktor 1 BT Skizzenfaktor 0.35 L2 Schriftfaktor 0.7 L1 Norm BT50__S13_11_Skizze2 Schraffurfaktor L2 1 L1 Skizzenfaktor 0.3 Schriftfaktor 0.7 G D2 D1 L3 HSK-A / HSK-C L2 L1 D2 D1 Norm HSK-F80__S13_12_Skizze2 Schraffurfaktor 1 Skizzenfaktor 0.35 CAPTO Schriftfaktor 0.7 D1 Norm C8__S13_11_Skizze3 304 Schraffurfaktor 1 Technical information Skizzenfaktor 0.35 Schriftfaktor 0.7
HSK forms and their key characteristics HSK DIN 69893 ISO 12164 Form A* // Standard type for machining centers and milling machines // For automatic tool change // Coolant supply through center via coolant tube // Drive keys at the end of HSK taper // Hole for data carrier DIN STD 69873 in the flange is available on request *Also usable in form C applications with side hole for manual tool change Form B // For machining centers, milling and turning machines // With enlarged flange size for higher radial rigidity // For automatic tool change // Coolant supply through the flange // Drive keys at the flange Available on request Form C // For transfer lines, special machines and modular tooling systems // For manual tool change // Drive keys at the end of HSK taper Form D // For special machines // With enlarged flange size for higher radial rigidity // For manual tool change // Coolant supply through the flange // Drive keys at the flange Available on request Form E // For high-speed applications // For automatic tool change // Coolant supply through center via coolant tube // Without any drive keys for absolute symmetry Form F // For high-speed applications // With enlarged flange size for higher radial rigidity // For automatic tool change // Without any drive keys for absolute symmetry Technical information 305
Page 4 and 5:
High-performance toolholding from t
Page 6 and 7:
Your application is our motivation
Page 9 and 10:
PG-MB PG PG-CF PG-L PG-S PG-T PG-SG
Page 11 and 12:
Automatic clamping unit PGU Toolhol
Page 13 and 14:
Manual clamping unit PGC 2506 Clamp
Page 15 and 16:
powRgrip ® toolholders in Swiss qu
Page 17 and 18:
HSK-A toolholders HSK-A DIN 69893 I
Page 19 and 20:
HSK-A toolholders Dimensions [mm] H
Page 21 and 22:
HSK-F toolholders HSK-F DIN 69893 I
Page 23 and 24:
SK toolholders SK DIN 69871 DIN ISO
Page 25 and 26:
SK toolholders SK-B toolholders SK
Page 27 and 28:
SK+ toolholder SK+ DIN 69871 DIN IS
Page 29 and 30:
BT toolholders BT MAS 403 JIS B 633
Page 31 and 32:
Page 33 and 34:
powRgrip ®
Page 35 and 36:
REGO-FIX BT+ dual contact toolholde
Page 37 and 38:
CAT toolholders CAT CAT-B ASME B5.5
Page 39 and 40:
CAT+ toolholders REGO-FIX CAT+ dual
Page 41 and 42:
REGO-FIX CAPTO toolholders licensed
Page 43 and 44:
D ISO 20 interface ISO 20 toolholde
Page 45 and 46:
CYL toolholders CYL-T toolholders (
Page 47 and 48:
secuRgrip ® toolholders PG-SG PG-S
Page 49 and 50:
Heavy Duty secuRgrip ® Toolholders
Page 51 and 52:
D PG tapping holders HSK-A SSY CYL
Page 53 and 54:
powRgrip ® collets in Swiss qualit
Page 55 and 56:
PG standard collets PG Std. powRgri
Page 57 and 58:
PG standard collets PG Std. powRgri
Page 59 and 60:
Coolant flush collets PG-CF PG-CF p
Page 61 and 62:
Long shank collets PG-L PG-L powRgr
Page 63 and 64:
Short shank collets PG-S PG-S powRg
Page 65 and 66:
secuRgrip ® collets PG-SG PG-SG po
Page 67:
powRgrip ®
Page 70 and 71:
Standard Colletholders for tapping
Page 72 and 73:
Cylindrical colletholders CYL/ ER C
Page 74 and 75:
HSK interface HSK toolholders Desig
Page 76 and 77:
HSK-A toolholders HSK-A DIN 69893 I
Page 78 and 79:
HSK-E toolholders HSK-F toolholders
Page 80 and 81:
SK interface Steep taper toolholder
Page 82 and 83:
SK-B toolholders SK-B DIN 69871 DIN
Page 84 and 85:
BT interface Steep taper toolholder
Page 86 and 87:
BT toolholders ERA Zero-Z ® toolho
Page 88 and 89:
BT-B toolholders BT-B Dimensions [m
Page 90 and 91:
BT+ interface REGO-FIX BT+ toolhold
Page 92 and 93:
CAT interface Steep taper toolholde
Page 94 and 95:
CAT-B toolholders CAT-B Dimensions
Page 96 and 97:
CAT+ interface REGO-FIX CAT+ toolho
Page 98 and 99:
REGO-FIX CAPTO interface REGO-FIX C
Page 100 and 101:
REGO-FIX CAPTO toolholders licensed
Page 102 and 103:
Cylindrical (CYL) interface Cylindr
Page 104 and 105:
CYL / ER toolholder CYL Dimensions
Page 106 and 107:
CYL / ERM toolholders (mini clampin
Page 108 and 109:
CYLF / ERM toolholders (mini clampi
Page 110 and 111:
CYLF / ERM toolholders (mini clampi
Page 112 and 113:
CYDF / ERM toolholders (mini clampi
Page 114 and 115:
MK interface Morse taper toolholder
Page 116 and 117:
SH interface Automotive shank toolh
Page 118 and 119:
D ISO 20 interface ISO 20 toolholde
Page 120 and 121:
ER tapping holders ER thread-cuttin
Page 122 and 123:
ER floating chucks ER floating chuc
Page 124 and 125:
PHC floating chucks for coolant thr
Page 126 and 127:
MPH mini floating chucks with intRl
Page 128 and 129:
Maintenance instructions for floati
Page 130 and 131:
Collet reductions Collet reductions
Page 132 and 133:
Collet reductions with intRlox ® (
Page 134 and 135:
swissQuick powRgrip ® adapter What
Page 136 and 137:
Micromachining Standard and ultrapr
Page 138 and 139:
Microbore collets ER-MB ER-MB Clamp
Page 140 and 141:
ER standard collets and ultraprecis
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Metallic sealed collets ER-DM ER-DM
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
ER-GB ER tapping collets ER-GB Manu
Page 156 and 157:
ER tapping collets ER-GB ER-GB [inc
Page 158 and 159:
PCM ET1 ER tapping collets PCM ET1
Page 160 and 161:
ER tapping collets PCM ET1 PCM ET1
Page 162 and 163:
Standard Standard with bearing Mini
Page 164 and 165:
C Hi-Q ® ER / ER standard Hi-Q ®
Page 166 and 167:
C Hi-Q ® ER / ERC Hi-Q ® / ERC fo
Page 168 and 169:
Hi-Q ® ERB / ERBC Hi-Q ® / ERB fr
Page 170 and 171:
C Hi-Q ® ERM / ERMC Hi-Q ® / ERM
Page 172 and 173:
C Hi-Q ® ERMX / ERMXC intRlox ® H
Page 174 and 175:
C ER MS ER MS clamping nuts for hig
Page 176 and 177:
Hi-Q ® ERAX / ERAXC Hi-Q ® / ERAX
Page 178 and 179:
eCool ® RCS Fast and easy retrofit
Page 180 and 181:
eCool ® RCR Low-cost retrofitting
Page 182 and 183:
eCool ® accessories Matching acces
Page 184 and 185:
Use conditions RCR reCool ® reCool
Page 187 and 188:
MR product offering Experience high
Page 189 and 190:
Toolholders in Swiss quality Norm D
Page 191 and 192:
D HSK-A toolholders HSK-A DIN 69893
Page 193 and 194:
micRun ®
Page 195 and 196:
SK toolholders SK DIN 69871 DIN ISO
Page 197 and 198:
Page 199 and 200:
CAT toolholders CAT ASME B5.50 Dime
Page 201 and 202:
CYL toolholders CYL Dimensions [mm]
Page 203 and 204:
Swiss quality MR collets MR collets
Page 205 and 206:
MR collets MR collets Ø Type Part
Page 207 and 208:
Grooveless MR nuts for high-end mac
Page 209 and 210:
Multi Line product offering Experie
Page 211 and 212:
Toolholders and adapters WD MA KFD
Page 213 and 214:
Weldon end mill holders HSK-A / WD
Page 215 and 216:
Universal shell / face mill holders
Page 217 and 218:
Drill chucks HSK-A / KBF HSK-A/KBF
Page 219 and 220:
Multi Line
Page 221 and 222:
Weldon end mill holders SK / WD SK
Page 223 and 224:
Drill chucks SK / KBF SK / KBF DIN
Page 225 and 226:
d BT / WD Weldon end mill holders B
Page 227 and 228:
Universal shell / face mill holders
Page 229 and 230:
Morse taper holders BT / MK BT / MK
Page 231 and 232:
d D d D REGO-FIX CAPTO holders lice
Page 233 and 234:
D REGO-FIX CAPTO holders licensed b
Page 235 and 236:
Multi Line
Page 237 and 238:
Reduction sleeves for hydro chucks
Page 239 and 240:
Reduction sleeves HS [inch] HS Ø b
Page 241 and 242:
1.1.3 1.1.2 Accessories 1.1.1 powRg
Page 244 and 245:
powRgrip ® length-presetting tool
Page 246 and 247:
Sealing disks DS Effective solution
Page 248 and 249:
Sealing disks for ER / MR DS / ER D
Page 250 and 251:
Sealing disks for ER / MR DS / ER D
Page 252:
Sealing disks for ER DS / ER Tool d
Page 255 and 256:
Coolant flush disks for ER / MR KS
Page 257 and 258: Coolant flush disks for ER / MR KS
Page 259 and 260: Wrenches E MS E AX E A Suited wrenc
Page 261 and 262: Wrench heads A-E A-E P A-E M A-E MX
Page 263 and 264: Slip-off proof extension V-E AX for
Page 265 and 266: Mobile workbench for PGU 9500 Descr
Page 267 and 268: TORCO-BLOCK and components Type Par
Page 269 and 270: Coolant tubes KSR Wrenches for cool
Page 271 and 272: Technical information Discover powR
Page 273 and 274: Increased cutter tool life with the
Page 275 and 276: Successful clamping since 1972 Comb
Page 278 and 279: XL vibration damping Optimize your
Page 280 and 281: Form-fit for 100 % pullout protecti
Page 282 and 283: Mastering both wet and dry applicat
Page 284 and 285: Cryogen: Coolant at the right spot
Page 286: powRgrip ® System and secuRgrip ®
Page 289 and 290: Presetting range of powRgrip ® col
Page 293 and 294: The unbeatable advantages from the
Page 295 and 296: Instructions for correct clamping o
Page 297 and 298: Recommended tightening torque for E
Page 299 and 300: 8° ER collets dimensions Size [mm]
Page 302 and 303: Dimensions for ER collet cavities i
Page 304 and 305: Technical information for tapping c
Page 306 and 307: Reduction sleeves HS Measurements [
Page 310: HSK interface HSK DIN 69893 ISO 121
Page 313 and 314: weight removed axis of gravity axis
Page 315 and 316: Balancing quality In recent years t
Page 317 and 318: Balancing at REGO-FIX All toolholde
Page 319 and 320: Interpreting the DIN 69888:2008-09
Page 321 and 322: designed specifically for this purp
Page 323 and 324: Troubleshooting when drilling Possi
Page 325 and 326: Troubleshooting when tapping Possib
Page 327 and 328: Cutting speed conversion table for
Page 329 and 330: Conversion table / inch-metric 0“
Page 331 and 332: Position tolerances according to DI
Page 334 and 335: Tolerance charts Outside dimensions
Page 336 and 337: Core hole diameters for thread cutt
Page 338 and 339: Core hole diameters for thread cutt
Page 340 and 341: Shank diameter of taps Thread ISO 5
Page 342 and 343: Material No. DIN AFNOR BS GOST USA
Page 356 and 357: Terminology M - Z M MA Shell Mill A
Page 360:
www.rego-fix.com 0362.00251 / ENG.1
show all

REGO-FIX Main Catalogue ENGLISH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?