Tekstil Teknik Temmuz 2022
Tekstil Teknik Temmuz 2022
Tekstil Teknik Temmuz 2022
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
74<br />
PANORAMA<br />
ça rekabetçi ve dayanıklı olduklarını gösterdi.<br />
Kompakt iplik üretiminde kullanılan Asteks<br />
delikli apronlarının yanı sıra, kullanım ihtiyaçlarına<br />
paralel geliştirilen üstün OPS/Performans-SS<br />
serisi apronlar da tekstil profesyonellerinin<br />
ve karar alıcıların beğenisini kazandı.<br />
<strong>Tekstil</strong> endüstrisinde moda ve maliyet ekseninde<br />
önemli dönüşümler yaşandığını ifade eden<br />
Sabri İlknur, özellikle geri dönüşümlü, sentetik<br />
ve selülozik elyafa olan talebin sürekli artış<br />
gösterdiğini söyledi. “Artan talep nedeniyle<br />
iplik üreticileri de bu yöne ağırlık veriyor” diyen<br />
İlknur, sözlerini şöyle sürdürdü; “<strong>Tekstil</strong> endüstrisi<br />
kendisini daha sürdürülebilir hale getiren<br />
bir dönüşüm yaşıyor. Gerek doğal kaynakların<br />
korunması ve optimum düzeyde kullanılması,<br />
gerekse geri dönüştürülmüş liflerin üretime<br />
tekrar kazandırılması endüstrisinin vizyonu yön<br />
veriyor. Bu nedenle iplik üreticilerinin yatırım<br />
tercihleri de değişiyor ve buna uygun çözümler<br />
arıyorlar. Asteks olarak eğirme süreci için<br />
gerekli olan bütün apron ve manşon çeşitlerine<br />
sahibiz ve fiyat/performans açısından bu<br />
rekabetçi ürünlerimizi hızlı bir şekilde tedarik<br />
edebiliyoruz. En zorlu ve kirli koşullardaki<br />
çalışmalar için bile ideal çözümlerimizle iplik<br />
üreticilerine katma değer sağlıyoruz.”<br />
concept in line with the market demands,<br />
ease of use, high automation capability and<br />
investment advantage. Sabri İlknur said that<br />
the 401-SF&M was developed in line with the<br />
demands of the textile industry based on the<br />
studies in the field for many years and shared<br />
the following details; “In effect, there are two<br />
separate machines within a single machine<br />
concept. The grinding process of draw frames<br />
and combed cotton cots can be performed<br />
simultaneously with its independent working<br />
feature on the one side while the grinding<br />
process of yarn and roving frames is carried<br />
out fully automatically on the other side. The<br />
machine is equipped with high automation<br />
features as well as the ability to perform two<br />
different cot grinding jobs. Pouring the cots<br />
into the feeding unit is sufficient for feeding in<br />
401-SF&M, while in other machines, cot feeding<br />
is done by manually arranging them one<br />
by one. The working systematic also includes<br />
significant innovations. The outer diameters of<br />
the cots are measured with the laser measurement<br />
system, and the ones outside the specified<br />
size are separated. The grinding efficiency<br />
of the machine is not affected at all since<br />
this process is performed before grinding. Then<br />
the machine automatically grinds the cots according<br />
to the data. The need for the operator<br />
to wait for the machine is eliminated during<br />
the process, allowing them to complete<br />
different jobs, which means added value for<br />
operational efficiency. Grinding of the draw<br />
frame cots takes place on the other side of<br />
the machine with the narrow grinding system<br />
simultaneously with the whole process.”<br />
The creators of 401-SF&M were honoured in a<br />
special ceremony<br />
A special ceremony was held at the exhibition<br />
for the developer of the 401-SF&M cot grinding<br />
machine, which was exhibited by Asteks<br />
at International Textile Machinery Fair <strong>2022</strong><br />
and managed to be among the best-selling<br />
prestigious products in the market in the past<br />
period. Asteks Achievement Plaque was presented<br />
to Asteks Technical Manager Selahattin<br />
Budak, the head of the technical team, for his<br />
valuable contributions to the development of<br />
the solution, which is a product of Asteks’ R&D<br />
team consisting of engineers and technicians.<br />
Speaking at the ceremony, Sabri İlknur said;<br />
“Mr Selahattin, with his strong sectoral background<br />
and technical knowledge, first dreamed<br />
of this machine and then turned it into<br />
reality with our team. I congratulate our entire<br />
team on behalf of him. Asteks, as a company<br />
that is open to creativity and development,<br />
also values rewarding the achievements.”<br />
TEKSTİL & TEKNİK TEMMUZ | JULY | <strong>2022</strong>