2024 - WBR - RHL Regulations

11 – 13 OCTOBER 2024
If any of the above items are not present when you attend this Control Point, you will not be able to
proceed to the next Control Point
CONTROL POINT 2
This is located at the Timing Offices, located half way up the promenade on the Right Hand Side.
Only Competitors who have hired a Transponder need to go to Control Point 2, where they will collect
their hired Transponder.
CONTROL POINT 3
This is located at the entrance to Parc Ferme.
Competitors cannot pass to Control Point 3 until they have passed through Control Point “1” and “2”
(if applicable). Failure to adhere to this will result in the Competitor being turned away and having
to restart the process in order.
Machine
Please ensure the last four digits of your frame number are contained within your Environmental and
Technical Document, before presenng your machine to the Technical Officers.
Competor Numbers
These must be clearly displayed on both the Front Number Board and Side Panels
Reflecve Front Number Board and Side Panels are not permited
Chain Guards And Cut Outs
If the primary transmission is exposed, it must be fited with a guard as a safety measure.
All Sidecars and Quads must be fited with Cut Out Lanyards
Lamps And Side Stands
Direcon Indicators and Wing Mirrors must be removed.
Other glass and plasc lenses must be taped over.
Side Stands must be removed.
Sound Tesng
Sound Tesng may be carried out during this secon of Environmental and Technical Control.
Any Competor whose machine fails the Sound Tesng or refuses to have their Machine Sound Tested
will be classified as failing Technical Control and will not be allowed to race.
The Machine will be confiscated and stored in a secure area, ready for collecon at the end of racing
on the Sunday of the event.
The maximum sound level is 96DBA for 2 stroke machines and 94DBA for 4 stroke machines (based on
stac test method).
WESTON BEACH RACE REGULATIONS 2024 Page 26 of 45