Download - Randall Mullin Website

Click on a note on each keyboard in sequence and follow the same
instructions for setting the other keyboard’s channels. In each dialog page
choose “Save.” If you decide to use other channels for these, keep in mind
that all of the divisional pistons already come configured for these
channels in Hauptwerk. If you change the channels you will have to
remap all of them in Hauptwerk, an unnecessary pain.
The General Settings Tab
The Light Show
When you have finished assigning channels, click on the General Settings
tab seen below. The top item listed is ”enable/disable Indicator lights.” If
you want to eliminate the “light show,” this is the place. Un-check (untick)
it.
Transposition and Channel changing surprises?
Have you been playing and found one manual in a different key from the
rest? Has the manual unexpectedly changed channels? Use the same
General Settings tab as you did to turn the “light show” off and uncheck
(untick) all of these “features.”
24