Download - Randall Mullin Website

More documents

Recommendations

Info

Should Hauptwerk stop you from loading and you see this screen, you decide how you would like to proceed. Select Cancel. To save memory, you can try the “less” options in the drop down lists on the right for some or all of the ranks, or you can turn off complete ranks selecting them on the left, and choosing “NO” in the Rank enabled field on the right. With the “less” options on the right you can tell Hauptwerk whether the ranks will load with multiple loops or one; multiple releases, or one. You can also truncate the releases of organs recorded “wet” in live rooms with the Release sample truncation field, essentially making them “dry.” Then you can apply external reverberation to them. If you would like to make changes for more than one rank at once, you can use the Shift and Control keys to select multiple ranks. For more information investigate the Loading Instruments section of the Hauptwerk User Manual. If you are having problems loading even smaller instruments, perhaps now would be a good time to investigate adding more memory to your computer. The prices have fallen dramatically in the last few years. As I write this in May 2011, I went on line to www.memory.com and investigated the price of maxing out a top of the line Dell T5500 workstation. They are currently selling 48 36
gigabytes of ram for $680! It was $16,000 for 32 gigabytes of memory when I first bought my Dell. The next thing that pops up is the Organ Ready Screen. This mentions one of the greatest advances in Hauptwerk 4. You can right-click on a virtual piston (or other control) and then it will “listen” for you to touch a real piston on your midi keyboard to make the connection between the two. There is more on this later. 37
Page 1 and 2: From exploration to completion Haup
Page 3 and 4: to my Hauptwerk setup, and gave him
Page 5 and 6: Where to start? Go to http://www.ha
Page 7 and 8: organist who wants to play difficul
Page 9 and 10: Now it is time to do your homework
Page 11 and 12: offers you 10 banks of 10 toe studs
Page 13 and 14: of a picture frame) the screen will
Page 15 and 16: I am using two Thiel towers which p
Page 17 and 18: Table Set up The packages have star
Page 19 and 20: Choir pedal. Allow about ¾” betw
Page 21 and 22: software unplug this cable from the
Page 23 and 24: Config, the application that progra
Page 25 and 26: Click on the pistons one by one and
Page 27 and 28: To set Crescendo, Swell and Choir P
Page 29 and 30: This should take care of the proble
Page 31 and 32: then you will see these screens: 31
Page 33 and 34: You will now be taken to the Hauptw
Page 35: Memory and other concerns If you ha
Page 39 and 40: Once you have moved or removed the
Page 41 and 42: double the numbers of a single core
Page 43 and 44: Pitch/Temperament Control Panel Her
Page 45 and 46: Expression/Crescendo Settings Go to
Page 47 and 48: If you are setting up all of the pi
Page 49 and 50: Symphonie VI,” one “Mendelssohn
Page 51 and 52: Duplicating Divisions Other things
Page 53 and 54: PART TWO 5. Now go to Organ setting
Page 55 and 56: Where are the buttons? Go to View/L
Page 57 and 58: Would you like several completely d
Page 59 and 60: A few final suggestions: 1. Hauptwe
Page 61 and 62: My Hauptwerk setup 4 Classic Midi W
Page 63: Here is an article, of services tha

Download - Randall Mullin Website

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?