Studio Designer User Guide - Esko Help Center

More documents

Recommendations

Info

10 Studio Designer 50 In this version of the software, we are not capable of doing this with the automatic distribute. We have limited the distribution functionality to panels that are coplanar. A face in the Studio window can be made up of different panels coming together. A beautiful example is the bottom of the box in the picture below.
Studio Designer The bottom of this box consists of four panels coming together. If you select Show Face Outlines in the Studio's fly-out menu, you will see blue lines showing up in your 2D Document Window. The solid blue line is a reflection of the selected red panel in the Studio Window. The other panels that are coplanar with the selected panel and that together form the bottom face, are drawn on top of that in dashed lines. If you were to draw some graphics and click Distribute Selection then the graphics would be copied and pasted to the three other panels that are coplanar with the selected one. Those three panels are shown with dashed blue lines in the 2D Document Window. In the following example, we would like a distribute from one panel to another that is adjacent to the first in the Studio Window, but they are not at all coplanar. On the contrary, the angle between the two panels is 90 degrees. As automatically distributing will be impossible in this case we will have to do the copying, rotating and pasting of the graphics ourselves. The Create 3D Guide option can be a solution. You could create a 3D Guide in the back inner panel and that is immediately going to create extra guides in the other panels that the guide plane intersects with. You could now design your graphics in the back inner panel. You do not need to do this upside down as double-clicking on the panel in the Studio Window will rotate the whole job. You can also rotate your job manually using the orientation buttons in the right top of the Studio Window. We will add some text to this panel that also needs to extend into the other panel. 51 10
Page 1 and 2: Studio Designer User Guide
Page 3 and 4: Contents 8. Working With Distribute
Page 5 and 6: • Studio Toolkit .bag files • C
Page 7 and 8: Studio Designer Please note that yo
Page 9 and 10: Studio Designer You can now see the
Page 11 and 12: 3. Studio Designer Basics Studio De
Page 13 and 14: Note: Studio Designer If the placed
Page 15 and 16: Note: Studio Designer Refresh is al
Page 17 and 18: 4. Working with Panels Studio Desig
Page 19 and 20: Studio Designer By holding the opti
Page 21 and 22: 4.5 Bring Panel Forward and Send Pa
Page 23 and 24: Studio Designer In this example, th
Page 25 and 26: Studio Designer Choose Back in the
Page 27 and 28: Tip: Studio Designer If you don't h
Page 29 and 30: Studio Designer To see the parts to
Page 31 and 32: 6. 3D Guides Studio Designer In Ill
Page 33 and 34: 6.2 Numeric Positioning of 3D Guide
Page 35 and 36: 7.2 Viewing the Composed Face Studi
Page 37 and 38: 7.4 Making Clipping Masks Studio De
Page 39 and 40: 8.2 Undistribute and Expand Studio
Page 41 and 42: Studio Designer further away from t
Page 43 and 44: Note: Studio Designer To avoid z-fi
Page 45 and 46: 10. FAQ This section contains the a
Page 47 and 48: Studio Designer Please note that yo
Page 49: Studio Designer If we do this for e

Studio Designer User Guide - Esko Help Center

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?