SIGMA 8000, 8000 Plus and 8002 Plus Infusion Pump Operator's ...

More documents

Recommendations

Info

Options List: No. Option 10 Alarm Tone Loudness Adjustment 11 Keylock 12 Return to Primary Mode 20 Piggyback-time (min.) and vol. limit 21 Piggyback-rate and vol. limit *30 Time-primary time (hrs.) and volume limit (not available) *35 Bolus Mode (not available) 40 Dose-units/hr (un/h) 41 Dose-units/kg/min (unkm) 42 Dose-units/kg/hr (unkh) 43 Dose-milliunits/min (mu/m) 44 Dose-grams/hr (g/h) 50 Dose-mcg/kg/min (ugkm) 51 Dose-mcg/kg/hr (ugkh) 52 Dose-mcg/min (ug/m) 53 Dose-mcg/hr (ug/h) 54 Dose-mg/kg/min (mgkm) 55 Dose-mg/kg/hr (mgkh) 56 Dose-mg/min (mg/m) 57 Dose-mg/hr (mg/h) *60 Programming-Automatic (21 steps) *61 Programming-Automatic (Opt. 60 or 62, taper steps only) *62 Programming-Automatic (custom ramps) *63 Programming-Manual (version 1) *64 Programming-Manual (version 2) 70 Occlusion Pressure (psi) 71 Occlusion Pressure (mmHg) 72 Occlusion Pressure - Alternating Pressure Trending w/Rate 73 Occlusion Pressure - 30 second Pressure Trending **80 Drug Label **81 Clear Drug Label *90 Delayed Start *95 Clear all Program Modes 99 Clear all 6 hour Memory Settings * Not available on all models ** Available for Plus models only 19 Rev.J
Options 10, 11, 12 OPT. NO. 20 Rev. J 10 OPTION NAME Alarm Tone Loudness Adjustment 11 Keylock 12 Return To Primary Mode INSTRUCTIONS DISPLAY Stop the pump. IN STOP/PUSH RUN Push OPTIONS. SET/OPT CODE Select 10. OPT 10/ALRM TONE/PUSH ENTR Push ENTER. Select 1 (quiet) to 3 (loud) if other than the displayed loudness level is desired TONE 2/PUSH ENTR Push ENTER. The audio will beep once at the selected level. Push RUN to start the infusion. TONE 2/PUSH RUN To enter KEYLOCK, push OPTIONS. SET/OPT CODE Select 11. OPT 11/KEY LOCK To leave KEYLOCK, push OPTIONS. SET/OPT CODE Select 11. OPT 11/LOCK OFF Note: The set must be loaded and parameters entered before entering KEYLOCK. All parameters can be read but not changed. The pump cannot be turned off. The infusion can be stopped by closing the roller clamp. Stop the pump. IN STOP/PUSH RUN Push OPTIONS. SET/OPT CODE Select 12. OPT 12/PRIM MODE/PUSH ENTR Push ENTER. From PIG Mode: PRIM MODE/RATE X/ VOLX/PUSH RUN From Dose Modes and Programming Modes: PRIM MODE / SET RATE / RATE 0/ SET VOL / VOL 0
Page 1 and 2: SIGMA 8000, 8000 Plus Plus and 8002
Page 3 and 4: INTRODUCTION: Introduction & Intend
Page 5 and 6: Views FRONT VIEW - 8000 Single Chan
Page 7 and 8: SUMMARY: Loading Sets & Start Up 1.
Page 9 and 10: Start-Up with Drug Error Prevention
Page 11 and 12: SUMMARY: Unloading Sets 1. With pow
Page 13 and 14: 7. To silence the audio alarm for 2
Page 15 and 16: unload and reload the set from the
Page 17 and 18: * PRI FLOW: The Flow Sensor has det
Page 19: Option Modes SUMMARY: 1. Push STOP.
Page 23 and 24: 22 Rev. J Options 21 OPT. NO 21 OPT
Page 25 and 26: 24 Rev. J Options 40, 41, 42, 43, 4
Page 27 and 28: Options 50 (cont’d), 51, 52 26 Re
Page 29 and 30: Options 53, 54, 55, 56, 57 28 Rev.
Page 31 and 32: 30 Rev. J Options 60 OPT. NO OPTION
Page 33 and 34: Options 63, 64, 70 32 Rev. J OPT. N
Page 35 and 36: Options 80 OPT. NO. 34 Rev. J OPTIO
Page 37 and 38: Options 81, 90 OPT. NO. 36 Rev. J 8
Page 39 and 40: Display Abbreviations Abbreviation
Page 41 and 42: Drug Abbreviation Drug Abbreviation
Page 43 and 44: CLEANING: Cleaning & Storing 1. Tur
Page 45 and 46: Cautions 1. Operation of this pump
Page 47 and 48: 22. The following precautions are s
Page 49 and 50: Accessories: Accessories and SIGMA
Page 51 and 52: RS232 (Pump to Computer Interface)
Page 53 and 54: Specifications *Applications: 1. La
Page 55 and 56: Distance Occlusion Above Pump RATE
Page 57 and 58: * RS232 Communication Port. * Alarm
Page 59: SHALL NOT BE DEEMED TO CREATE AN EX

SIGMA 8000, 8000 Plus and 8002 Plus Infusion Pump Operator's ...

Create successful ePaper yourself

Delete template?

Save as template?