ENVI PRO OPERATION MANUAL - Scintrex

Operating Displays
5—15
“+” or “-“keys. It is also possible to adjust the vertical
scale and bring any point to the vertical center of the
window.
Exact values can be read off the numerical section at the left hand side of the
display.
The Total Field display is shown and explained. The Gradient display differs in title
only. The Base Station display shows Time and Date instead of Line and Station.
Note that there are two pages of data for the gradiometer.
These displays are accessible with the “START” key when in the
RECALL SETUP display.
The RECALL DATA display
Display Item Description
The title of the display indicating the data shown by the graph.
TOTAL The numeric value indicated by MMMMM.M is the respective totalfield
value, at the indicated line and station number.
The line number along which this measurement took place,
LN
consisting of the numeric and directional parts.
The station number to which the respective magnetic data applies,
ST
consisting of the numeric and directional parts, at the cursor
position.
Modifying the display window
The graph can be altered by changing the vertical scale or by centering any point
vertically in the window. A smaller window can be opened up using the “ENTER”
key to allow changes. The changes take effect after you press “ENTER”.
P/N 788715 Rev. 0