Release Bulletin NP V10.4.1R02 - Comtech EF Data

More documents

Recommendations

Info

Using this Document Concerning Potential Downgrade Problems Caution: NetPerformer downgrade from V10.4.1 to an earlier version can produce unexpected results: • An alarm will be logged for each parameter that is unknown in the target version, and that parameter will be ignored • The journal file (JOURNAL.TXT) lists all parameters that have been skipped in this way • Do not attempt to downgrade to a software version earlier than V10.2.2 on 150-0022-X2X or 150-0023-X2X release 3 SDM-9230 equipment or higher. Notice Concerning HyperTerminal Connections The HyperTerminal� communications program comes with Microsoft� Windows� products, and can be used for very basic NetPerformer console functions if no terminal emulation program is available. Caution: HyperTerminal is not recommended for adjusting the NetPerformer configuration or monitoring its operations. Known problems include the following: • The arrow keys cannot be used to view channel status on all slots • The console speed cannot be changed once the console connection is up and running • On some computers, the default Emulation setting of the HyperTerminal� communications program can potentially cause problems for NetPerformer console operations. If you must use HyperTerminal for your console connection, you should change the Emulation setting from Auto detect to ANSI, as follows: 1. Access HyperTerminal using the Windows Start button and drop-down menus: Start > Programs > Accessories > Communications > HyperTerminal 2. If you have already defined the connection to the NetPerformer console port, open that connection: File > Open > your_filename.ht If you have not yet defined the connection to the NetPerformer console port, create a new connection: 2-4 Memotec Inc.
File > New Connection > your_filename 3. Open the Properties window for the connection: File > Properties Notice Concerning HyperTerminal Connections 4. Click on the Settings tab to view the current value of the Emulation parameter. 5. Select the value ANSI from the list box for the Emulation parameter. 6. Click OK. NOTE: The above procedure does not resolve the problems with arrow key functionality or console speed, and should be considered a temporary solution only. You should procure a more robust terminal emulation software program for configuration and monitoring purposes. Contact Backhaul Solutions Technical Support if you need further assistance. Memotec Inc. 2-5
Page 1 and 2: Release Bulletin NetPerformer ® Ve
Page 3 and 4: Contents About this Release Bulleti
Page 5 and 6: Bug Changes . . . . . . . . . . . .
Page 7 and 8: About this Release Bulletin 1 This
Page 9 and 10: Version 10.4.1 Release Summary •
Page 11 and 12: PowerCell Voice Transport (DCME) Ne
Page 13 and 14: Requirements, Limitations, and Comp
Page 15 and 16: 8400. DSP Algorithms (Quadra File)
Page 17 and 18: List of Subsystems and Versions Sub
Page 19 and 20: Upgrade Procedures 2 Memotec Inc. 2
Page 21: Password Usage Upgrading the NetPer
Page 25 and 26: Changes/Fixes in V10.4.1 R01 3 Memo
Page 27 and 28: Main Application redundant SDM-9600
Page 29 and 30: GSM Main Application • Resolved:
Page 31 and 32: Main Application • Modified: On t
Page 33 and 34: Examples of the DLS display: Main A
Page 35 and 36: Main Application NOTE: Alarm indica
Page 37 and 38: Ethernet/IP Main Application • Ad
Page 39 and 40: ARP CACHE Operation (DISPLAY/CLEAR,
Page 41 and 42: Main Application Specifies the subn
Page 43 and 44: Main Application Capture mode (def:
Page 45 and 46: Example of a PATTERN test: LOOP Bac
Page 47 and 48: Example: Main Application - The DLS
Page 49 and 50: Main Application • Resolved: The
Page 51 and 52: Main Application - Display PVC DLCI
Page 53 and 54: Main Application • Resolved: The
Page 55 and 56: Main Application Example of DPP com
Page 57 and 58: Main Application - Some slots may b
Page 59 and 60: DSP Algorithms (Quadra File) QB 1.2
Page 61 and 62: Bug Fixes in 10.4.1 R01 4 Memotec I
Page 63 and 64: Bug Changes Bug 4087 - FXS seizure
Page 65 and 66: Bug Changes IPX/MAP/ PHONE/PORT/PU/
Page 67 and 68: Bug Changes Bug 4340 - Voice channe
Page 69 and 70: • Value range: 0 to 120 • Defau
Page 71 and 72: Quadra QB/QC: Resolved in QB 1.2.7

Release Bulletin NP V10.4.1R02 - Comtech EF Data

Create successful ePaper yourself

Delete template?

Save as template?