Release Bulletin NP V10.4.1R02 - Comtech EF Data

Using this Document
The user can press to access the command line prompt before the SP command
has terminated. In this case, the message Save profile continuing in background
is displayed at the console.
• Modified: It is now possible to switch from the Incoming to the Outgoing window
when executing the Display Timeslot Subchannels (DTSCH) command.
Press the space bar to navigate between the two displays.
• Modified: The Display Timeslot Subchannel (DTSCH) command now has the
option of displaying information for both incoming and outgoing traffic at the
same time.
- When you execute the DTSCH command, select INCOMING & OUTGOING as
the display type
- To switch between incoming and outgoing traffic while the DTSCH command
is running, press the space bar
- Another alternative is to use the K extended menu, and press J to display one
or both traffic directions.
• Modified: The abbreviation KB is now used instead of Kb to represent kilobytes
for the ELOGSIZE global extended parameter settings.
• Modified: In the display of several statistics commands, an extra space between
the type of interface and its number has been removed.
For example, the Display Destination Table (DD) command formerly displayed
numbered interfaces in the format WAN 1:
AF.9230-2>DD
DISPLAY DESTINATION TABLE
The destination table has 2 entry(ies)
DESTINATION VAL COST INTRF NEXT HOP AGE
AF.9230-1 Y 0 WAN 1 AF.9230-2 0 s
AF.9230-2 Y 0 LOCAL AF.9230-2 0 s
The DD command now shows WAN 1 (with no extra space):
AF.9230-1>DD
DISPLAY DESTINATION TABLE
The destination table has 2 entry(ies)
DESTINATION VAL COST INTRF NEXT HOP AGE
AF.9230-1 Y 0 LOCAL AF.9230-1 0 s
AF.9230-2 Y 0 WAN 1 AF.9230-1 0 s
The commands affected by this formatting change include:
- Display PVC States (DPVC)
3-26 Memotec Inc.