DEH-P80MP - Service.pioneer-eur.com - Pioneer
DEH-P80MP - Service.pioneer-eur.com - Pioneer
DEH-P80MP - Service.pioneer-eur.com - Pioneer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section<br />
05<br />
RDS<br />
! The preset number may disappear on the display<br />
if the tuner tunes in a regional station<br />
which differs from the originally set station.<br />
! The regional function can be turned on or off<br />
independently for each FM band.<br />
Receiving traffic<br />
announcements<br />
TA (traffic announcement standby) lets you receive<br />
traffic announcements automatically, no<br />
matter what source you are listening to. TA<br />
can be activated for both a TP station (a station<br />
that broadcasts traffic information) or an<br />
enhanced other networks TP station (a station<br />
carrying information which cross-references<br />
TP stations).<br />
1 Tune in a TP or enhanced other networks<br />
TP station.<br />
When you are tuned into a TP or enhanced<br />
other networks TP station the Traffic (T) indicator<br />
will light.<br />
2 Press TA to turn traffic announcement<br />
standby on.<br />
Press TA and TA ON appears in the display.<br />
The tuner will stand-by for traffic announcements.<br />
# To turn traffic announcements standby off,<br />
press TA again.<br />
3 Use Multi-Control to adjust the TA volume<br />
when a traffic announcement begins.<br />
Rotate it to increase or decrease the volume.<br />
The newly set volume is stored in memory and<br />
recalled for subsequent traffic announcements.<br />
4 Press TA while a traffic announcement<br />
is being received to cancel the announcement.<br />
The tuner returns to the original source but remains<br />
in the standby mode until TA is pressed<br />
again.<br />
# You can also cancel the announcement by<br />
pressing SOURCE, BAND or Multi-Control while<br />
a traffic announcement is being received.<br />
Notes<br />
! You can also turn the TA function on or off in<br />
the menu that appears by using<br />
Multi-Control.<br />
! The system switches back to the original<br />
source following traffic announcement reception.<br />
! Only TP and enhanced other networks TP stations<br />
are tuned in during seek tuning or BSM<br />
when TA is on.<br />
Using PTY functions<br />
You can tune in a station by using PTY (program<br />
type) information.<br />
Searching for an RDS station by<br />
PTY information<br />
You can search for general types of broadcasting<br />
programs, such as those listed on page<br />
23.<br />
1 Use Multi-Control to select program<br />
type selection display.<br />
Program type (e.g., News&Inf) appears in the<br />
display.<br />
2 Push Multi-Control left or right to select<br />
a program type.<br />
There are four program types:<br />
News&InfPopularClassicsOthers<br />
20<br />
En