DEH-P80MP - Service.pioneer-eur.com - Pioneer

Section
10
TV tuner
Introduction of advanced
TV tuner operation
1
1 Function display
Shows the function names.
1 Press Multi-Control to display the main
menu.
FUNCTION and AUDIO appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to select.
BSSM appears on the display.
# To return to the frequency display, press
BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the TV picture.
Storing broadcast stations
You can easily store up to 12 broadcast stations
for later recall.
1 When you find a station that you want
to store in memory press LIST to switch to
the preset channel list mode.
2 Use Multi-Control to select the preset
number.
Turn to change the preset number; press to select.
112 is displayed as the preset number is
selected.
3 Press Multi-Control and hold to store
the broadcast station in memory.
The selected broadcast station has been
stored in memory.
# If you do not operate the list within about 8
seconds, the preset channel list mode is cancelled
automatically.
Note
Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
Recalling broadcast stations
You can recall broadcast station assigned to
preset numbers.
% Push Multi-Control up or down to recall
broadcast stations.
Pushing Multi-Control up or down selects the
preset number. P01 P12 is displayed as the
preset number is selected.
The broadcast station assigned to the preset
number is recalled from memory.
Storing the strongest
broadcast stations
sequentially
1 Use Multi-Control and select FUNCTION
to display BSSM.
48
En