1 Introduction to the 20FD Series Flat Panel TVs - Pioneer Electronics

01 Introduction to the 20FD Series Flat Panel TVs
12
En
1.2.3 Buttons on the Remote Control
Except for a few options, commands available through the buttons on the flat panel TV are duplicated on the
remote control. The remote control can be programmed to control other equipment such as a DVD Player,
Surround Sound system, etc. A later section entitled “5 Use Other Equipment With Your Flat Panel TV” explains
how to use the remote to control other equipment.
This section identifies and describes the buttons on the remote control.
Remote: Left side buttons (top to bottom, left to right)
TV :
Turn On or place panel in Standby
INPUT:
Select a source (INPUT 1 thru INPUT 7)
PC:
Select the PC terminal as an input source
AV SELECTION:
Select audio/video settings
AV Source: OPTIMUM, PERFORMANCE, DYNAMIC,
MOVIE, GAME, SPORT, Standard
PC Source: STANDARD, USER
SPLIT:
Cycle view thru single-screen, 2-screen,
picture-in-picture
FREEZE:
Freeze a frame from a moving image then
press again to cancel the freeze function
Number buttons 0 thru 9:
Select a channel
(dot):
Enter a dot for selecting a sub-channel
VOL +/–:
Set the volume
EXIT:
Exit the menu to return to the normal screen
Arrow buttons:
Navigate the menu screens
HOME MENU:
Display the HOME MENU
Color buttons (Red, Green, Blue, Yellow):
Control a BD player for HDMI Control functions only
HDMI CONTROL:
Select the HDMI Control functions
SELECT:
Select for TV/RCV, CBL/SAT, VCR, or DVD/DVR
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
3 4
5 6
8
9
10
12
14
15
2
7
13
11