1 Introduction to the 20FD Series Flat Panel TVs - Pioneer Electronics

05 Use Other Equipment With Your Flat Panel TV
82
En
5.4.4 Test the Power Control (On/Off)
Your flat panel TV provides an HDMI control option to test equipment power when it is connected to the panel’s
HDMI ports and it has been properly assigned to an Input.
To confirm that the Power On/Off control function is working, follow the steps below.
1 ) Access the Option through the Setup.
2 ) Select HDMI Control Setting from the Option menu.
3 ) Select a test option (Power On Test or Power Off Test ) from the submenu.
A list containing all HDMI connected equipment appears.
4 ) Select a piece of equipment from the list.
5 ) Repeat this process to test other equipment from the list.
6 ) Press HOME MENU to exit the menu when all testing is complete.
If the Power On/Off Test fails, check the connection points and the settings.
5.5 Connect a Game Console or Camcorder
Your flat panel TV supplies direct connections for a game console, camcorder, or other Audio/Visual (AV)
equipment through INPUT 3. To watch an image coming from a game console or camcorder, press INPUT 3 on
the remote control or repeatedly press INPUT on the panel to select INPUT 3. For details on game console
settings, refer to “2.5.2 Connect Your Other Pioneer Equipment” and to “4.1.4 Set the Panel to Recognize a Game
Console.”
Use the connection type specified by the equipment. Connect equipment only to terminals that are actually to be
used.