1 Introduction to the 20FD Series Flat Panel TVs - Pioneer Electronics

Use Other Equipment With Your Flat Panel TV 05
During playback, use the remote control’s up/down arrows (/) to cycle through the surround sound options.
Use the left/right arrows (/) to change the input. To resume playback, return to the HDMI Control menu then
select the function again.
AV Systems
1 Cycles the surround mode in sequence
2 Switches the input source in reverse order
3 Switches the surround mode in reverse order
4 Closes the screen to return to HDMI Control
menu
5 Lists the connected equipment
(model number)
6 Switches the input source in sequence
7 Reserved/Void
5.3.2 Control a Recorder
Press ENTER to start playback or press HDMI CONTROL to return to the menu. This process also applies to
Players. Refer to the chart below for available commands.
Recorders
1 Skips commercials
2 Fast reverse
3 Stops playback
4 Closes the screen to return to HDMI Control
menu
5 Lists the connected equipment
(model number)
6 Fast forward
7 Starts playback
Note: You can also use (Play), (Stop), (Pause), (Fast Forward) and (Fast Reverse) on the remote
control to conduct the same operations as the control menu buttons.
5.3.3 Control a Player
Press ENTER to start playback or press HDMI CONTROL to return to the menu. This process also applies to
Recorders. Refer to the chart below for available commands.
Players
1 Displays the DVD/Blu-ray disc menu on the
player
2 Fast reverse
3 Stops playback
4 Closes the screen to return to HDMI Control
menu
5 Lists the connected equipment
(model number)
6 Fast forward
7 Starts playback
Note: You can also use (Play), (Stop), (Pause), (Fast Forward) and (Fast Reverse) on the remote
control to conduct the same operations as the control menu buttons.
1
2
3
1
2
3
1
2
3
INPUT-
4
4
4
HDMI Control
Exit
****
SURROUND+
SURROUND-
Exit
INPUT+
HDMI Control
****
HDMI Control
Exit
****
MENU
5
6
7
5
6
7
5
6
7
English
79
En