Samsung Moniteur 32" - 400cd/m² - DM32E (LH32DMEPLGC/EN ) - Manuel de l'utilisateur 5.03 MB, pdf, Anglais

Preventing afterimage burn-in
――
The best way to protect the product from afterimage burn-in is switching the power off or setting the
PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending
on instruction guide.
••
Powering Off, Screen Saver and Power Saving Mode
--
Power off the product for 2 hours after using it for 12 hours.
--
Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
--
Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
••
Regular colour Change
--
Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
FLIGHT
OZ348
Type 1 Type 2
TIME
20:30
UA102 21:10
FLIGHT
OZ348
TIME
20:30
UA102 21:10
••
Regular Text colour Change
--
Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
FLIGHT
TIME
OZ348 : 20:30
FLIGHT
:
TIME
OZ348 : 20:30
:
FLIGHT
TIME
OZ348 : 20:30
FLIGHT
:
TIME
OZ348 : 20:30
--
Move and change text every 30 minutes as shown below.
FLIGHT
OZ348
:
:
[ Step 1 ]
TIME
20:30
:
[ Step 2 ]
••
Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of
light emitted.)
――
Avoid using grey as it may contribute to afterimage burn-in.
――
Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT
TIME
OZ348 : 20:30
:
FLIGHT
TIME
OZ348 : 20:30
:
FLIGHT
TIME
OZ348 : 20:30
:
[ Step 3 ]
- - Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
187