Samsung Moniteur 32" - 400cd/m² - DM32E (LH32DMEPLGC/EN ) - Manuel de l'utilisateur 5.03 MB, pdf, Anglais
Samsung Moniteur 32" - 400cd/m² - DM32E (LH32DMEPLGC/EN ) - Manuel de l'utilisateur 5.03 MB, pdf, Anglais
Samsung Moniteur 32" - 400cd/m² - DM32E (LH32DMEPLGC/EN ) - Manuel de l'utilisateur 5.03 MB, pdf, Anglais
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Input source control<br />
0x24<br />
HDMI2_PC<br />
••<br />
Function<br />
The input source of a product can be changed using a PC.<br />
••<br />
Viewing input source state (Get Input Source Status)<br />
Hea<strong>de</strong>r Command ID Data length Checksum<br />
0xAA 0x14 0<br />
••<br />
Setting the input source (Set Input Source)<br />
Hea<strong>de</strong>r Command ID Data length Data Checksum<br />
0xAA 0x14 1 "Input Source"<br />
"Input Source": An input source co<strong>de</strong> to be set on a product.<br />
0x25<br />
DisplayPort<br />
――<br />
DVI_vi<strong>de</strong>o, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to<br />
"Get" commands.<br />
――<br />
This mo<strong>de</strong>l does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.<br />
――<br />
MagicInfo is only available with mo<strong>de</strong>ls that contain the MagicInfo function.<br />
――<br />
RF(TV), DTV are only available with mo<strong>de</strong>ls that inclu<strong>de</strong> a TV.<br />
••<br />
Ack<br />
Hea<strong>de</strong>r Command ID Data length Ack/Nak r-CMD Val1 Checksum<br />
0xAA 0xFF 3 'A' 0x14 "Input<br />
Source"<br />
0x14<br />
0x18<br />
0x0C<br />
0x08<br />
0x20<br />
0x1F<br />
0x30<br />
0x40<br />
0x21<br />
0x22<br />
0x23<br />
PC<br />
DVI<br />
Input source<br />
Component<br />
MagicInfo<br />
DVI_vi<strong>de</strong>o<br />
RF(TV)<br />
DTV<br />
HDMI1<br />
HDMI1_PC<br />
HDMI2<br />
"Input Source": An input source co<strong>de</strong> to be set on a product.<br />
••<br />
Nak<br />
Hea<strong>de</strong>r Command ID Data length Ack/Nak r-CMD Val1 Checksum<br />
0xAA 0xFF 3 'N' 0x14 "ERR"<br />
"ERR" : A co<strong>de</strong> showing what error has occurred.<br />
37
Change language