Sony HT-NT3 - HT-NT3 Mode d'emploi Anglais

Follow the steps in “Activating
wireless transmission between
specific units” (page 36).
The on/standby indicator of the
subwoofer flashes quickly in green.
Consult your nearest Sony dealer.
The on/standby indicator of the
subwoofer flashes in red.
Press the (on/standby) on the
subwoofer to turn off the power
and check whether the ventilation
opening of the subwoofer is
blocked or not.
The subwoofer is designed for
playback of bass sound. When the
input source does not contain much
of bass sound, as is the case with
most TV programs, the bass sound
may not be audible.
Press the SW + to increase the
volume of the subwoofer (page 51).
Sound skips or has noise.
If there is a device nearby that
generates electromagnetic waves
like a wireless LAN or an electronic
oven in use, locate the system apart
from it.
If there is an obstacle between the
Bar Speaker and the subwoofer,
move or remove it.
Locate the Bar Speaker and the
subwoofer as close as possible.
Switch the wireless LAN frequency
of any nearby Wi-Fi router or
personal computer to 2.4 GHz
range.
Switch the LAN connection of the TV
or Blu-ray Disc player from
wireless to wired.
Playback
File names are not displayed correctly.
The system can only display ISO
8859-1 compliant character
formats. Other character formats
may be displayed differently.
44 GB
Depending on the writing software
used, the input characters may be
displayed differently.
A file does not start playing from the
beginning.
Resume play has been selected.
Press OPTIONS and select [Play
from start], then press .
Playback does not start from the
resume point where you last stopped
playing.
The resume point may be cleared
from memory depending on the file
when
you disconnect the USB device.
you play other content.
you turn off the system.
Unstable playback when using Screen
mirroring.
Depending on the usage
environment, devices emitting
radio waves such as other wireless
LAN devices or microwave ovens
may interfere with the Screen
mirroring. Move the system and the
Screen mirroring-compatible device
away from such devices, or turn off
such devices.
Depending on the usage
environment, communication
speed may be affected by the
distance or obstacle between
devices, types of device, device
configuration, or radio waves.
Communication may be lost due to
line congestion.
USB device
The USB device is not recognized.
Try the following:
Turn the system off.
Remove and reconnect the USB
device.
Turn the system on.