G&D CATVision - Guntermann und Drunck GmbH
G&D CATVision - Guntermann und Drunck GmbH
G&D CATVision - Guntermann und Drunck GmbH
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
<strong>Guntermann</strong> & <strong>Drunck</strong> <strong>GmbH</strong> Operating Instructions<br />
<strong>CATVision</strong> (MC)<br />
5.4.4.1 Changing video channels<br />
This function is only with <strong>CATVision</strong>-MC-Systemen available.<br />
IVT<br />
Active channel: 1<br />
CVM<br />
The entry “active channel” refers to the corresponding used video channel.<br />
The channels can be selected via pressing the keys 1 to 4.<br />
Confirm with ENTER.<br />
5.4.4.2 Automatic Settings<br />
You can establish all video settings automatically. To do so, you must be<br />
connected to a target.<br />
To activate this function, press the F5 key. While the settings for the active<br />
channel are being established automatically, the monitor turns black for approx.<br />
3 seconds.<br />
With the F6 key the settings will be established for all channels (only with<br />
<strong>CATVision</strong>-MC systems). In this case, following message appears on your<br />
monitor:<br />
Info CVM<br />
Please wait<br />
Automatic Video Tuning<br />
status<br />
Channel 1: ok<br />
Channel 2: not connected<br />
Channel 3: in progress<br />
Channel 4: wait<br />
Whilst the automatic measuring this windows informs you about the process of<br />
the respective measurement.<br />
page 23
Change language