G&D CATVision - Guntermann und Drunck GmbH

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
6.1.2 AutoLogout Setting
With this setting you can activate the automatic LOGOUT of the system. The
automatic LOGOUT, like the manual (F8), leads you back to the LOGIN mask.
With this the system is protected against unauthorized access. You can only
get access after entering your password in the LOGIN window.
The time until the LOGOUT is carried out is set by moving the cursor to the line
AutoLogout. The current entry can be written over or edited by pressing
ENTER.
Valid is a time of 1 - 60 minutes. The entry “0” sets the Logout to “OFF”.
ENTER closes the entry.
For saving and closing this menu press F1 .
6.1.3 Defining the Console Name
In case of using many switches every G&D device can be given a unique name,
the Console Name.
Move the cursor to the line Console Name. The current entry can be written
over or edited by pressing ENTER.
Valid is an entry of 10 alphanumerical characters. ENTER closes this entry.
For saving and closing this menu press F1.
page 30