3.RYK guidelines - Rajiv Yuva Kiranalu - Centre for Good Governance

IT & C Technical specifications for Biometric Authentication
1 TFT display (suggested only when capturing of images is planned)
2 High Resolution Optical fingerprint Scanner minimum 500 DPI
3 Transaction record: 100,000 impressions
4 Biometrics only Authentication
5 USB Port, TCP/IP
6 In built GPRS modem in the device
7 In-device authentication
8 Person Name and ID display, Photo display
9 Automatic server to Device Synchronized
10 Lowest Fingerprint Data Storage
11 FAR – Near 0.001% and FRR Near 0.01%
12 In-built battery backup of minimum 4 hours
13 Automatic fingerprint detection and activation
14 Online or Offline Transmission of data (preferably online and can manage the device
through web base application. Data should be centrally collected)
15 Any Standards Certification
16 Image resolution 500 DPI (already included below)
17 Image bit depth 8 bit, 256 grayscale
18 Image dimensions: minimum 280 x 352 pixels
19 Field distortion < 0.1% corrected over active area
20 MTF contrast > 0.135 @ 10 cycles/mm sine wage
21 Finger Capture Device: Optical Sensor Based, Multispectral technology desirable
22 Resolution: Minimum 500 DPI Image
23 Interface to Host: USB/Com Port
24 Supported Operating system: Linux is preferable / Windows XP
Annexure-9
25 Suitable enclosure with lock and key for biometric devices with Wall mounting accessories
for physical security and tempering.
Guidelines - Rajiv Yuva Kiranalu
56