CAP 720 - Kathrein
CAP 720 - Kathrein
CAP 720 - Kathrein
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
18<br />
INSTALLATION AND CONNECTION<br />
BRIEF INSTRUCTIONS FOR INSTALLING THE TURNTABLE<br />
The sequence of pictures shown illustrates all the necessary installation steps<br />
that are required to install the turntable and the parabolic refl ector on the roof of<br />
the vehicle.<br />
The other detailed instructions in this installation and operating manual must also be followed!<br />
Determination of installation location.<br />
Important! System has a turning<br />
range of 162 cm (Ø). Drill hole with<br />
Ø 38 mm. Deburr sharp edges of<br />
hole.<br />
Unscrew screws (x 6, 10 AF) from<br />
the mounting plate and remove<br />
the mounting plate.<br />
Apply Sikafl ex® 291i adhesive to<br />
the spigot of the roof gland. Insert<br />
the spigot into the hole and secure<br />
it from below with the knurled nut.<br />
Place the turntable on prepared<br />
wooden supports to protect the<br />
roof of the vehicle.
Change language