CAP 720 - Kathrein

The following display appears:
Use the buttons to select whether
to replace the factory pre-programmed
channel list by a pre-sorted channel list
for a specifi c country (at present only
a limited number of pre-sorted channel
lists are available). If you prefer to use
the factory pre-programmed channel list,
choose “No” under “Restore Channellist”.
Press the (green) button to move to the next menu.
The following display appears:
Use the buttons here to select the
basic settings for the video and audio
output from the receiver to the TV set.
For this, refer to the operating manual
for your TV set and take care to select
only those settings that your TV set can
process.
Video Output via
Select the connection on the receiver to which you have connected your television.
Either
HDMI Format
Here you can select the picture resolution that
will be sent to your TV set. Either
- 1080i (resolution 1920 x 1080, half-screen
images)
- 576p (resolution 720 x 576, full-screen images)
or
- 720p (resolution 1280 x 720, full-screen
images)
- automatically
50
FIRST INSTALLATION
HDMI or
VIDEO
Note: The better picture quality, in particular for HDTV signal is obtained via the HDMI port.
The precondition for this however is that your TV set has a HDMI port.
TV Format
Here you can select the TV picture format. Either
- 4:3 or
- 16:9