CAP 720 - Kathrein

Show 4:3 event
Here you can select the type of screen display
mode for 4:3 broadcasts on a 16:9 TV set:
- normal (pillarbox)
- Stretched (Full Screen) or
- zoom in (Pan & Scan)
Audio format via HDMI
Here you can select the type of audio signal
that is transmitted by the HDMI interface.
Select the signal that your TV set can process:
- Decoded PCM or
- S/PDIF format
TV standby via HDMI
If you select “Off”, the TV set must be switched
on or off separately. If you select “On”, the TV set
will be switched on automatically as the receiver
starts up (but only if the TV set was in stand-by
mode). If the receiver is switched off into standby
mode, the TV set will also be switched to
stand-by mode.
Automatically switching the TV set on/off by the
receiver is available only if the TV set supports
this function!
System
FIRST INSTALLATION
Press the (green) button to move to the next menu.
The following display appears:
Use the buttons here at “System” to select “CAP”. Then use the buttons to select the
“Initialize CAP” line and press the button to confi rm.
Picture format
Select the type of screen display, depending on
your setting for the TV format:
- TV aspect ratio “4:3”: Pan & Scan or Letterbox
- TV aspect ratio “16:9”: Always 16:9 or
automatic
Television System
Here you can select the TV standard you wish
to use.
- PAL or
- NTSC or
- MULTI
51