CAP 720 - Kathrein

More documents

Recommendations

Info

18 INSTALLATION AND CONNECTION BRIEF INSTRUCTIONS FOR INSTALLING THE TURNTABLE The sequence of pictures shown illustrates all the necessary installation steps that are required to install the turntable and the parabolic refl ector on the roof of the vehicle. The other detailed instructions in this installation and operating manual must also be followed! Determination of installation location. Important! System has a turning range of 162 cm (Ø). Drill hole with Ø 38 mm. Deburr sharp edges of hole. Unscrew screws (x 6, 10 AF) from the mounting plate and remove the mounting plate. Apply Sikafl ex® 291i adhesive to the spigot of the roof gland. Insert the spigot into the hole and secure it from below with the knurled nut. Place the turntable on prepared wooden supports to protect the roof of the vehicle.
Align mounting plate. Arrow in the direction of travel. Mark out the six holes for securing the mounting plate. Place mounting plate on roof gland and secure with appropriate screws (choose screws according to thickness/structure of roof). INSTALLATION AND CONNECTION Apply Sikafl ex® 291i adhesive in a sinuous line between the two grooves and spread with spatula or similar. Avoid skin contact! Screw turntable on to mounting plate using torque wrench. Important! Tightening torque: 6 Nm Set up electrical connections. Connect the UFS 940 receiver. Connect the turntable to the battery. The antenna must always be lowered into horizontal position (park position) while driving! Maximum driving speed of the vehicle: 130 km/h 19
Page 1 and 2: Translation of the original operati
Page 3 and 4: MOBISET 3 TWIN CAP 720 COMPONENTS/S
Page 5 and 6: CONTENTS (OPERATING MANUAL) CAP 720
Page 7 and 8: SAFETY INSTRUCTIONS - IMPORTANT INF
Page 9 and 10: SAFETY INSTRUCTIONS - IMPORTANT INF
Page 11 and 12: • When selecting the installation
Page 13 and 14: Figure: B INSTALLATION AND CONNECTI
Page 15 and 16: • Ensure before starting adhesive
Page 17: INSTALLATION AND CONNECTION VERSION
Page 21 and 22: PREPARATIONS Removing the blanking
Page 23 and 24: INSTALLATION AND CONNECTION Useful
Page 25 and 26: • Lay the master coaxial cable (m
Page 27 and 28: Figure: G Important: For operation
Page 29 and 30: If repairs to the system or individ
Page 31 and 32: Satelliten/Satellites/Satellites Hi
Page 33 and 34: POLARISATION SETTING 6. Use the bu
Page 35 and 36: If a defect arises in the electroni
Page 37 and 38: DIMENSIONS (MM) TECHNICAL SPECIFICA
Page 39 and 40: TECHNICAL SPECIFICATION Type CAP 72
Page 41 and 42: SIKAFLEX ® 291i SAFETY DATA SHEET
Page 43 and 44: SIKAFLEX ® 291i SAFETY DATA SHEET
Page 45 and 46: SIKAFLEX ® 291i TECHNICAL DATA SHE
Page 47 and 48: CAP 720 OPERATING MANUAL The operat
Page 49 and 50: FIRST INSTALLATION Before using you
Page 51 and 52: Show 4:3 event Here you can select
Page 53 and 54: CAP MENU (TURNTABLE ANTENNA SETTING
Page 55 and 56: ELEVATION CAP MENU (TURNTABLE ANTEN
Page 57 and 58: ALIGNMENT (SATELLITE SEARCH) The an
Page 59 and 60: CHANNEL (SATELLITE) SELECTION/PROGR
Page 61 and 62: PARKING THE TURNTABLE You have four
Page 63 and 64: SPECIAL MESSAGES FROM THE TURNTABLE
Page 65 and 66: SPECIAL MESSAGES FROM THE TURNTABLE
Page 67 and 68: DISPOSAL INSTRUCTIONS Electronic eq

CAP 720 - Kathrein

Create successful ePaper yourself

Delete template?

Save as template?