Akai XR20 Reference Manual - V1.3 - zZounds.com
Akai XR20 Reference Manual - V1.3 - zZounds.com
Akai XR20 Reference Manual - V1.3 - zZounds.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SENDING MIDI SYSEX SONG AND PATTERN DATA TO THE <strong>XR20</strong><br />
If you wish to load Pattern and Song data back into the <strong>XR20</strong>, please follow the instructions<br />
below. Please note that this operation will erase any Song and Pattern data which exists on the<br />
<strong>XR20</strong>!<br />
1. Connect a 5-pin MIDI cable from your MIDI SysEx device to the <strong>XR20</strong>’s MIDI IN.<br />
2. Turn off the <strong>XR20</strong>.<br />
3. Hold down the SAVE / COPY button.<br />
4. Turn on the <strong>XR20</strong> while holding down the<br />
SAVE / COPY button.<br />
5. After a few seconds, you should see the<br />
screen displayed on the right. The <strong>XR20</strong> is<br />
ready to receive data.<br />
6. Now transfer the MIDI system exclusive data<br />
into the <strong>XR20</strong>. Refer to your MIDI SysEx<br />
device’s documentation for information on<br />
transferring MIDI SysEx.<br />
7. Once the transfer is <strong>com</strong>plete, turn off the<br />
<strong>XR20</strong> and then turn it back on.<br />
53