MCset 4 - 24 kV - engineering site - Schneider Electric

End panels assembling
Cubicle configuration:
- Internal arc protection on
4 sides.
For more details, see drawing
ref. 03837 02N0.
Take out from bolts and screws bag:
- bolts H,
- nuts G and I,
- washers L-M-N.
: H + L
: H + I + L
: H + I + L + N
: G + H + M
Tools
- 2 ratchet spanners n. 0 (A) with the
relevant extension.
Operating instructions:
- Position and fix the uprights D and E and
the traverse C.
- Position and fix the traverse A and F.
- Position and fix the panel O.
- Position and fix the panels P and Q.
- Position and fix the panel S, the plate R
and the supporting T.
- Position and fix the panel U.
- Repeat the operation for the right side.
- For access to the fixing points, see various
possibilities of access to the interior of the
cubicles.
58 - 07897542EN indice: D0
Installation instructions
Schneider Electric