MCset 4 - 24 kV - engineering site - Schneider Electric
MCset 4 - 24 kV - engineering site - Schneider Electric
MCset 4 - 24 kV - engineering site - Schneider Electric
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fitting the main busbars<br />
For more details, see drawing<br />
ref. 0383566 N0.<br />
For access to busbars, see various<br />
possibilities of access to the interior of the<br />
cubicles.<br />
Tools<br />
- Fork or ring spanner n. 9 (A).<br />
- 2 ring spanners n. 9 (B1) or as alternative.<br />
- 2 ratchet spanners n. 9 (B2).<br />
- torque spanner (C).<br />
60 - 07897542EN indice: D0<br />
Installation instructions<br />
Cubicle type<br />
AD4-CL4-GL4-TT4-RD4 and DI4.<br />
- Fit the main busbars between the 2 units.<br />
- Insert the bolts and tighten them (to be<br />
recommended tightening value).<br />
1 : self-locking nut<br />
2 : nut<br />
3 : washer<br />
4 : screw<br />
Cubicle type CL4 and GL4<br />
This procedure shall be repeated for any unit<br />
added to the switchboard.<br />
<strong>Schneider</strong> <strong>Electric</strong>
Change language