UTP HydroCav - UTP Schweissmaterial

Standards :
Material-No. : ~ 1.4440
EN 1600 : ~ E 18 16 5 N LR 3 2
AWS A5.4 : ~ E 317 L-16
UTP 1817
Low carbon stick electrode for
CrNiMo-steels
Application field
UTP 1817 is a rutile coated stick electrode for joining and surfacing on stainless steels.
Base materials
1.4401, 1.4404, 1.4406, 1.4429, 1.4435, 1.4436, 1.4438, 1.4439, 1.4446, 1.4448
Properties of the weld metal
The weld deposit of UTP 1817 is stainless and IK-resistant (wet corrosion up to 400°C). Due to its high
Mo-content it has increased resistance to chloride containing media and pitting. Not magnetizeable.
Mechanical properties of the weld metal
Yield strength
R p0,2
MPa
350
Weld metal analysis in %
Tensile strength
R m
MPa
550
Elongation
A
%
35
Impact strength
K v
Joule
80
C Si Mn Cr Mo Ni N Fe
0,025 0,8 1,0 18,0 4,0 17,0 0,1 balance
Welding instruction
Welding area must be degreased and thoroughly cleaned to metallic bright. Preheating is usually not necessary.
If requested a solution heat treatment at 1050°C may be carried out.
Current type
= + ~
Availability / Current adjustments
Welding positions
Stick electrodes Ø mm x L 2,5 x 300*
Amperage A 40 - 80
* available on request
Approvals
TÜV (No. 03192)
PA PB PC PE PF
331