UTP HydroCav - UTP Schweissmaterial

More documents

Recommendations

Info

387 UTP UNIBOND Flame spraying powders UTP designation EN 1274 Grain size Chemical composition in % Hardness Availability Characteristics and application fields UTP UB 5–2525 A* 2.2 – 125/36 – 125 + 36 µm C 0,05 230 HV Well suited to machine cutting; mould construction, glass indu- Fe B 0,4 1,8 1,0 Kg box stry. Si 2,8 Ni balance UTP UB 5–2540 2.7 – 125/45 – 125 + 45 µm C 0,25 38 – 42 HRC Fe Cr 2,5 7,5 1,0 Kg box B 1,6 Si 3,5 Ni balance * available on request. Good resistance to corrosion and wear even at high operating temperatures; valve discs, conveyour chains, mixer parts, friction bearings, moulds in the glass industry, feed screws.
388 UTP UNIBOND Flame spraying powders UTP designation EN 1274 Grain size Chemical composition in % Hardness Availability UTP UB 5–2550* 2.8 – 125/45 – 125 + 45 µm C 0,45 Fe 3,0 50 HRC Cr B 11,0 2,2 1,0 Kg box Si 3,7 Ni balance UTP UB 5–2555* 2.14 – 125/45 – 125 + 45 µm C 0,5 B 3,7 55 – 60 HRC Cr Cu 16,5 3,0 Fe 2,9 Mo 3,0 1,0 Kg box Ni balance Si 4,2 UTP UB 5–2760 2.9 – 125/45 – 125 + 45 µm C 0,75 60 HRC Fe Cr 3,5 15,0 1,0 Kg box B 3,2 Si 4,4 Ni balance UTP UB 5–2862* – – 125 + 45 µm NiCrBSi with the addition 60 HRC of 35 % (Matrix) tungsten carbide 1,0 Kg box * available on request. Characteristics and application fields Good resistance to corrosion and wear even at high operating temperatures; gauges, cogs, bearing surfaces, cylinders, guide mechanisms, mixer blades, continuously cast rollers, valve discs, glass industry. Toughened coatings; valve stems, mixer and stirrer shafts, bearing seats, wearing rings, pump shafts, impellers. Excellent resistance to wear and corrosion, high level of hardness with moderate dynamic compression stress; feed screws, running and sealing surfaces in valves, fittings and bearing seats. High abrasion resistance; stirrers, mixer blades, mould edges, extruder screws.
Page 1 and 2:
www.utp-welding.com
Page 3 and 4:
WELDING CONSUMABLES
Page 5 and 6:
Index 4 page UTP 3 Product Index 5
Page 7 and 8:
Product Index numerical UTP page 19
Page 10 and 11:
Index High corrosion applications H
Page 12 and 13:
Stick electrodes for high corrosion
Page 14 and 15:
Standards EN ISO 18274 Material-No.
Page 16 and 17:
Solid rods and wires for high tempe
Page 18 and 19:
Solid rods and wires for nickel all
Page 20 and 21:
19 Welding consumables for nickel a
Page 22 and 23:
Standards : Material-No. : ~1.4563
Page 24 and 25:
Standards : Material-No. : 2.4621 E
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Standards : EN ISO 14172 : E Ni 106
Page 32 and 33:
Standards : Material-No.. : 1.4563
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Standard : Material-No. : 2.4607 EN
Page 42 and 43:
Page 44 and 45:
Standards : Material-No. : ~1.4842
Page 46 and 47:
Page 48 and 49:
Standard : Material-No. : 2.4879 EN
Page 50 and 51:
Standards : Material-No. : ~ 2.4680
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Standards : Wire Material-No. : 2.4
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Standard Special alloy UTP A 8036 F
Page 80 and 81:
Page 82 and 83:
Page 84:
Standards Wire Material-No. : 2.480
Page 89 and 90:
88 General wear protection stick el
Page 91 and 92:
UTP 7200 E 7-UM-250-KP Basic coated
Page 93 and 94:
UTP A SUPER DUR W 80 Ni UTP A 34 N
Page 95 and 96:
SK 350-G SK 258-O SK 600-G SK 650-G
Page 97 and 98:
UP solid wires / UP flux combinatio
Page 99 and 100:
UTP 690 E 4-UM-60-ST Rutile coated
Page 101 and 102:
Gas shielded flux cored wires for t
Page 103 and 104:
Solid rods on Cobalt base (Cobalt h
Page 105 and 106:
2.2 104 a) b) Crack welding Crack m
Page 107 and 108:
2.5 Flux metallurgic fabricated ste
Page 109 and 110:
Standards : DIN 8555 : E 1-UM-300 E
Page 111 and 112:
Standards : DIN 8555 : E 1-UM-400 E
Page 113 and 114:
Standards : DIN 8555 : E 6-UM-60 EN
Page 115 and 116:
Standards : DIN 8555 : E 7-UM-200-K
Page 117 and 118:
Standards : DIN 8555 : E 7-UM-250-K
Page 119 and 120:
Standards : DIN 8555 : E 8-UM-300-C
Page 121 and 122:
Standards : DIN 8555 : E 10-UM-60-G
Page 123 and 124:
Page 125 and 126:
Standards : DIN 8555 : ~ E 10-UM-60
Page 127 and 128:
Page 129 and 130:
Standards : DIN 8555 : E 31-UM-200-
Page 131 and 132:
Standards : Material-No. : 1.8401 D
Page 133 and 134:
Page 135 and 136:
Standards : DIN 8555 : WSG 21-GS-60
Page 137 and 138:
Page 139 and 140:
Standards : DIN 8555 : G 21-GF-60 G
Page 141 and 142:
UTP-system for mineral wear protect
Page 143 and 144:
Standards : DIN 8555 : MF 1-GF-250
Page 145 and 146:
Page 147 and 148:
Standards : DIN 8555 : MF 6-GF-60 E
Page 149 and 150:
Standards : DIN 8555 : MF 6-GF-60-G
Page 151 and 152:
Standards : DIN 8555 : MF 7-GF-200-
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Standards : Material-No. : Special
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Standards : DIN 8555 : E 3-UM-45-T
Page 169 and 170:
Page 171 and 172:
Standards : DIN 8555 : E 3-UM-60-ST
Page 173 and 174:
Page 175 and 176:
Standards : DIN 8555 : E 4-UM-60-ST
Page 177 and 178:
Standards : DIN 8555 : E 6-UM-60-S
Page 179 and 180:
Page 181 and 182:
Standards : EN 14700 : E Z Ni2 180
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Standards : DIN 8555 : MF 3-GF-55-S
Page 193 and 194:
Standards : DIN 8555 : MF 3-GF-40-T
Page 195 and 196:
Page 197 and 198:
Standards : DIN 8555 : MF 5-GF-45-C
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Standards : DIN 8555 : G/WSG 20-G0-
Page 213 and 214:
Standards : DIN 8555 : ~ G/WSG 20-G
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
218
Page 221 and 222:
220 Special alloys stick electrodes
Page 223 and 224:
UTP 68 HH E Ni 6082 Basic coated, f
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Current type : DC (+) Availability
Page 237 and 238:
Page 239 and 240:
238 Index Welding consumables for c
Page 241 and 242:
Stick electrodes for cast iron mate
Page 243 and 244:
Welding of cast iron materials Appl
Page 245 and 246:
Standards : EN ISO 1071 : E C Ni-Cl
Page 247 and 248:
Standards : EN ISO 1071 : ~ E NiCu-
Page 249 and 250:
Standards : EN ISO 1071 : E C Ni-Cl
Page 251 and 252:
Standards : EN ISO 1071 : E C NiFe-
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Standards : EN ISO 1071 : E C Fe-2
Page 259 and 260:
Standards : EN ISO 1071 : S C NiFe-
Page 261 and 262:
Standards : EN ISO 1071 : R C Z FeC
Page 263 and 264:
262
Page 265 and 266:
264 Welding consumables for copper
Page 267 and 268:
Solid rods and wires UTP A 38 S Cu
Page 269 and 270:
The welding of copper and copper al
Page 271 and 272:
270
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Standards : DIN 1733 : ~ E 31-UM-30
Page 281 and 282:
Page 283 and 284:
Standards : Special alloy Applicati
Page 285 and 286:
Page 287 and 288:
Standards : Special alloy 286 CuAlM
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Standards : EN ISO 24373 : S CuZ 63
Page 295 and 296:
Page 297 and 298:
296 Index Stainless and acid resist
Page 299 and 300:
Stick electrodes for stainless and
Page 301 and 302:
Solid rods and wires for stainless
Page 303 and 304:
Stick electrodes for heat resistant
Page 305 and 306:
Welding instruction Total cleanline
Page 307 and 308:
306 Table for use Base materials to
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Standards : EN 1600 : ~ E 22 9 3 N
Page 329 and 330:
Standards : EN 1600 : E 25 9 3 Cu N
Page 331 and 332:
Standards : EN 1600 : ~ E 23 12 2 L
Page 333 and 334:
Page 335 and 336:
Standards : EN 1600 : E 25 22 2 N L
Page 337 and 338: Standards : Material-No. : ~ 1.4009
Page 339 and 340: Standards : Material-No. : ~ 1.4351
Page 341 and 342: Standards : Material-No. : 1.4316 E
Page 355 and 356: Standards Wire : Material-No. : 1.4
Page 357 and 358: Standards : Material-No. : 1.4302 A
Page 361 and 362: 360 Index Welding consumables for l
Page 363 and 364: Stick electrodes for low-alloyed st
Page 365 and 366: Standard : EN ISO 2560-A : ~ E 38 0
Page 367 and 368: Standard : EN ISO 2560-A : ~ E 42 5
Page 369 and 370: Standard : EN ISO 2560-A : E 38 0 R
Page 371 and 372: Standard : EN ISO 2560-A : E 50 0 B
Page 373 and 374: Standard : Material-No. : 1.5125 EN
Page 375 and 376: Standard : EN ISO 16834-A : G Mn3Ni
Page 377 and 378: 376
Page 379 and 380: 378 Flame spraying powders UTP EXOB
Page 381 and 382: UTP UNIBOND flame spraying powders
Page 383 and 384: 382
Page 385 and 386: 384 UTP EXOBOND Flame spraying powd
Page 387: 386 UTP EXOBOND Flame spraying powd
Page 391 and 392: 390 UTP HABOND Flame spraying powde
Page 397 and 398: 396 UTP PTA Metal powders for plasm
Page 399 and 400: 398 Abbreviations and designations
Page 401 and 402: Alloying and Accompanying Elements
Page 403 and 404: COBALT ordinal number: 27 crystal s
Page 405 and 406: MOLYBDENUM ordinal number: 42 cryst
Page 407 and 408: LEAD ordinal number: 82 crystal str
Page 409 and 410: TITANIUM ordinal number: 22 crystal
Page 411 and 412: 410 Brinell Vickers Rockwell 80 85
Page 413 and 414: Stress / Pressure : source target 1
Page 415 and 416: Work sequences during welding of se
Page 417 and 418: Welding positions according to DIN
Page 419 and 420: Hardening and annealing temperature
Page 421 and 422: Material test certificates accordin
Page 423 and 424: 422 Wire Basket Spool DIN EN ISO 54
Page 425 and 426: Nickel Nickel alloys 80 M, 80 Ni, 1
Page 427 and 428: Approvals of UTP welding consumable
Page 429 and 430: 428 All data on our products contai
Page 431: www.utp-welding.com
show all

UTP HydroCav - UTP Schweissmaterial

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?