UTP HydroCav - UTP Schweissmaterial

384
UTP EXOBOND Flame spraying powders
UTP designation
EN 1274
Grain size Chemical
composition
in %
Hardness
Availability
UTP EB–1025
– – 125 µm Zn > 99,5
23 HB
1,0 Kg box
UTP EB–1030
1.8 – 160/45 – 160 + 45 µm Cu > 99,5
ca. 85 HB
1,0 Kg box
UTP EB–1050*
11.8 – 45/5.6 – 45 + 5.6 µm Co 12
800 HV
WC 88
5,0 Kg box
UTP EB–2001
~3.2 – 125/45 – 125 + 45 µm C 0,04
160 – 230 HV
Si
Cr
0,4
15,5
1,0 Kg box
Fe 8,0
Mn 0,3
UTP EB–2002
Ni balance
– – 106 + 36 µm C 0,2 Al 0,4 350 – 380 HB
Cr
Si
9,3
2,7
Ni balance
1,0 Kg box
Fe 1,9
B 1,2
* available on request
Characteristics
and application fields
Active corrosion protection on steel under atmospheric stresses
Coatings providing good electrical conductivity;electrical con-trol
buses, creation of soldering surfaces, electrical industry
High resistance to abrasion and erosion; ventilator blades, sieve
surfaces, feed screws
CrNi alloys of moderate hardness subject to sliding friction
wear, shaft journals, gland seats, cams of brake shafts, seal rings,
impellers, valve stems, bearings etc.
Oxidation stability at moderate temperatures, high wear resistance;
camshafts, bearings of rollings, cylinder liners, valve
stems, hydraulic pistons, sliding ways etc