30.06.2013 Views

Evaluating A Selection of Tools for Extraction of Forensic Data: Disk ...

Evaluating A Selection of Tools for Extraction of Forensic Data: Disk ...

Evaluating A Selection of Tools for Extraction of Forensic Data: Disk ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FTK Imager 2.9.0.1385 (Release Date: 8 th , Apr 2010)<br />

1.17 TC-07- Insufficient space & TC-08<br />

Test Case TC-07-Insufficient space & TC-08 (FTK Imager 2.9.0.1385)<br />

Test &<br />

Case<br />

Summary:<br />

Attempt to create an image file where destination device has insufficient<br />

space , and see whether the tool notifies the user and <strong>of</strong>fer another<br />

destination device to continue<br />

Assertion: AFR-01 The tool accesses the digital source with a supported access interface<br />

AFR-02 The tool acquires a digital source<br />

AFR-03 The tool operates in an execution environment<br />

AFR-04 The tool creates an image file <strong>of</strong> the digital source<br />

AFR-05 The tool acquires all the visible data sectors from the digital source<br />

AFR-07 All data sectors acquired from the digital source are acquired accurately.<br />

AIC-04 The tool reports to the user if insufficient space in the destination device<br />

during the image creation process.<br />

AIC-05 If multi-file image creation and the image file size is selected, the tool<br />

creates a multi-file image except that one file may be smaller<br />

AIC-10 The tool reports to the user if insufficient space in the destination device to<br />

contain the multi-image file creation and if destination device switching<br />

function is supported, the image is continue on the selected destination<br />

device.<br />

ALOG-01 If the tool logs any in<strong>for</strong>mation regarding to the acquisition, the<br />

in<strong>for</strong>mation is accurately logged in the log file.<br />

ALOG-02 The tool display correct in<strong>for</strong>mation about the acquisition to the user.<br />

ALOG-03 The tool display correct in<strong>for</strong>mation regarding to the acquisition to the<br />

user and the in<strong>for</strong>mation displayed is consistent with the log file if the log<br />

file function is supported<br />

Source<br />

Device:<br />

Drive<br />

Setup:<br />

Partition<br />

Table:<br />

Log<br />

highlights:<br />

Drive Model: ST380811 AS (80GB)<br />

Serial Number: 6PS2CA4Z<br />

Sector count: 156,296,385<br />

Write blocker: Tableau <strong>Forensic</strong> SATA/IDE Bridge IEEE 1394 SBP2<br />

Device<br />

/dev/sdc: current max LBA: 156,296,385<br />

/dev/sdc: native max LBA: 156,296,385<br />

/dev/sdc: physical max LBA: 156,296,385<br />

/dev/sdc: HPA not set<br />

/dev/sdc: DCO not set<br />

Device Start End #sectors System<br />

unallocated 0 156296384 156296385 Empty<br />

183

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!