PSR-E333/YPT-330 Owner's Manual - Yamaha Downloads
PSR-E333/YPT-330 Owner's Manual - Yamaha Downloads
PSR-E333/YPT-330 Owner's Manual - Yamaha Downloads
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
44<br />
Connecting to a Computer<br />
This instrument can be connected to a computer to allow transfer of MIDI data or a file.<br />
MIDI (Musical Instrument Digital Interface) is a world-standard interface for communication<br />
between electronic musical instruments and music devices.<br />
MIDI settings such as Local Control are made in the Function settings (page 42 Function<br />
027–030).<br />
Connecting a Personal Computer<br />
1<br />
2<br />
3<br />
4<br />
Turn off the power of the instrument before connecting a USB cable.<br />
Turn on the power of the computer.<br />
Quit any open application software on the computer.<br />
Connect the instrument and the computer via a USB cable.<br />
Turn on the power of the instrument.<br />
When you connect the instrument to a computer for the first time, the driver is installed automatically.<br />
Operating System (OS)<br />
Windows XP (SP3 or later)/Windows Vista *Only 32-bit, Windows 7, Mac OS X Version 10.5.0–10.6.x<br />
When data communication is unstable or some problem occurs even though you’ve executed the above<br />
instructions, download the <strong>Yamaha</strong> Standard USBMIDI driver from the following URL then install it to your<br />
computer. For instructions on installation, refer to the Install Guide included in the package file.<br />
http://download.yamaha.com/<br />
For details about OS for <strong>Yamaha</strong> Standard USB-MIDI driver, visit the URL above.<br />
Precautions when using the USB terminal<br />
When connecting the computer to the USB terminal, make sure to observe the following points. Failing to do so<br />
risks freezing the computer and corrupting or losing the data. If the computer or the instrument freezes, restart the<br />
application software or the computer OS, or turn the power to the instrument off then on again.<br />
NOTICE<br />
<strong>PSR</strong>-<strong>E333</strong>/<strong>YPT</strong>-<strong>330</strong> Owner’s <strong>Manual</strong><br />
USB terminal<br />
USB cable<br />
USB terminal<br />
Instrument<br />
• Use an AB type USB cable of less than about 3 meters. USB 3.0 cables cannot be used.<br />
• Before connecting the computer to the USB terminal, exit from any power-saving mode of the computer (such as suspend, sleep,<br />
standby).<br />
• Before turning on the power to the instrument, connect the computer to the USB terminal.<br />
• Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/from the USB terminal.<br />
• Quit any open application software on the computer.<br />
• Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing notes on the keyboard or<br />
playing back a song.)<br />
• While the computer is connected to the instrument, you should wait for six seconds or more between these operations: (1) when turning<br />
the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable.