Mitel 5624 Wireless Handset User Guide - Mitel Edocs

5624 Wireless Handset User Guide
Voice Mail
32
Send Mobile Data with a Prefix
Mobile data with a prefix is sent from the handset by entering data and then pressing a
pre-programmed hot key or soft key or selecting a service. Mobile data with a prefix can be
used to send information to an application in the system.
You define the prefix when you program the hot/soft key or service. See the Mitel 5624 Wireless
Handset Configuration Guide.
Note: This feature is available only if configured in the system.
Receive a Voice Mail
When receiving a voice mail, the content of the voice mail notification appears automatically
on the screen, and is also indicated by the “Voice mail message” icon in the status bar.
If the content of the notification appears, press “Call” to dial the voice mail. If "Close” is selected,
you can dial the voice mail by a long press on digit key “1” in standby mode or from the Inbox
menu.
Information is stored in the “Messaging” inbox until you listen to the voice mail messages.
Check the Voice Mail Inbox
The voice mail is indicated by a “Voice mail message” icon in the front of the voice mail
message, and is also displayed first in the inbox list.
1. In the “Messaging” menu, select “Inbox”.
2. Select the voice mail message.
3. Press “View”.
4. Press “Call”.
Voice mail will be displayed with one entry in the message list regardless of the number of voice
mail received.
One Key Voice Mail Access
A long press on digit key “1” in standby mode will call your voice mail. If the extension number
is not available the “Voice mail number not defined" window appears.
Note: Some systems require the mailbox extension number to be downloaded to the
handset. See the Mitel 5624 Wireless Handset Configuration Guide.