Installation and Operation Manual - Biznine.com

More documents

Recommendations

Info

Preface Safety Carefully review all safety precautions to avoid injury and prevent damage to this product or any products connected to it. If this product is rack-mountable, it should be mounted in an appropriate rack using the rack-mounting positions and rear support guides provided. It is recommended that each frame be connected to a separate electrical circuit for protection against circuit overloading. If this product relies on forced air cooling, it is recommended that all obstructions to the air flow be removed prior to mounting the frame in the rack. If this product has a provision for external earth grounding, it is recommended that the frame be grounded to earth via the protective earth ground on the rear panel. IMPORTANT! Only qualified personnel should perform service procedures. Safety Terms and Symbols in this Manual WARNING Statements identifying conditions or practices that may result in personal injury or loss of life. High voltage is present. CAUTION Statements identifying conditions or practices that can result in damage to the equipment or other property. xii XHD6801+ Installation and Operation Manual
Overview Chapter 1 Introduction XHD6801+ modules offer broadcast-quality HD/SD-SDI upconversion, crossconversion, and downconversion with aspect ratio conversion (ARC), and closed-captioning support. There are three basic varieties available: • XHD6801+UCT up/crossconverter • XHD6801+DT downconverter • XHD6801+UCDT up/cross/down converter XHD6801+UC and XHD6801+D and can be upgraded in the field to full up/cross/down converter functionality. This chapter includes the following topics: • “Product Description” on page 2 • “Module Description” on page 6 Note XHD6801+ modules must be installed in frames with fans. FR6802+DM and 6800/7000 series frames also do not support these products. XHD6801+ Installation and Operation Manual 1
Page 1: XHD6801+ Broadcast-Quality Up/Cross
Page 4 and 5: Copyright Information Warranty Info
Page 6 and 7: Contents Upgrading Module Firmware
Page 8 and 9: Contents vi XHD6801+ Installation a
Page 10 and 11: Preface Writing Conventions Obtaini
Page 12 and 13: Preface Restriction on Hazardous Su
Page 16 and 17: Chapter 1: Introduction Product Des
Page 18 and 19: Chapter 1: Introduction Software Ke
Page 20 and 21: Chapter 1: Introduction Module Desc
Page 22 and 23: Chapter 1: Introduction Back Module
Page 24 and 25: Chapter 1: Introduction Signal Flow
Page 26 and 27: Chapter 2: Installation Maximum 680
Page 28 and 29: Chapter 2: Installation Setting Jum
Page 30 and 31: Chapter 2: Installation Input/Outpu
Page 32 and 33: Chapter 2: Installation Upgrading M
Page 34 and 35: Chapter 2: Installation • View th
Page 36 and 37: Chapter 2: Installation Manually Ad
Page 38 and 39: Chapter 2: Installation 24 XHD6801+
Page 40 and 41: Chapter 3: Configuration and Operat
Page 64 and 65:
Chapter 3: Configuration and Operat
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Chapter 4: Parameters, LEDs, and Al
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Chapter 5: Specifications Inputs SD
Page 90 and 91:
Chapter 5: Specifications Outputs S
Page 92 and 93:
Chapter 5: Specifications 78 XHD680
Page 94 and 95:
Appendix A: Communication and Contr
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Index G Gain, bypass, and delay for
Page 102:
Index 88 XHD6801+ Installation and
show all

Installation and Operation Manual - Biznine.com

Create successful ePaper yourself

Delete template?

Save as template?