04.08.2013 Views

Supply, installation, testing and commissioning of pcs and ... - GAIL

Supply, installation, testing and commissioning of pcs and ... - GAIL

Supply, installation, testing and commissioning of pcs and ... - GAIL

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3 UPS 0.6 KVA<br />

Makes Recommended:<br />

APC / LIEBERT / TVSE / VINITEC / WIPRO<br />

Type: Line Interactive<br />

Rating: Min. 600 VA<br />

Input <strong>Supply</strong>:180 V to 275 V AC<br />

Nominal Output:<br />

i) On Grid –190 V to 240 V AC<br />

ii) On Battery- 230V AC + 5%,<br />

50 + 0.5 Hz<br />

Battery:<br />

Back up time – Min. 10 minutes on 450 VA<br />

continuous load<br />

Type – SMF<br />

Recharge time – < than 6 hours<br />

Makes – Hitachi/ Global Yuasa/ CSB/<br />

Panasonic/ Exide,<br />

Pls. specify<br />

Transfer time:<br />

< 5 ms without losing data<br />

Built in AVR- Required<br />

Protection: Overload, Short circuit, Spike &<br />

Surge<br />

Indications: Mains ON, Battery ON,<br />

Overload<br />

Audio Alarms: Low battery, Battery ON,<br />

Overload<br />

Communications:<br />

Hardware:<br />

RS 232-C Serial port or USB port with<br />

Interface cable -3 feet length,<br />

S<strong>of</strong>tware:<br />

Required for health monitoring <strong>of</strong> battery<br />

<strong>and</strong> Power Mgmt. System<br />

O/P Sockets – Min. 3 nos.,<br />

Each 6A, 3 pins (Min. 2 nos. sockets shall be<br />

wired for UPS O/P)<br />

Power Cables - For all the O/P sockets<br />

each min. 4 ft. long IN CASE the UPS has<br />

BN 55 etc. type O/P Power receptacles for<br />

feeding AC power to CPU box, Monitor etc.<br />

Documentation:<br />

Operation Manual<br />

Operation Training:<br />

Shall be provided to the Users at <strong>GAIL</strong>’s<br />

Offices<br />

224

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!